Cleaning The Spray Arms - Miele G 7360 SCVi AutoDos Operating Instructions Manual

Hide thumbs Also See for G 7360 SCVi AutoDos:
Table of Contents

Advertisement

Cleaning the spray arms

Particles of food can get stuck in the
spray arm nozzles and bearings. The
spray arms should therefore be inspec-
ted regularly (approx. every 2–
4 months).
Never run a wash programme
without using the spray arms.
Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
 Switch the dishwasher off.
Cleaning and care
Removing the cutlery tray (if present)
In order to be able to remove the upper
spray, you first have to remove the cut-
lery tray (if present).
 Take out the cutlery tray.
 Press the rail safety clips on both
sides of the cutlery tray together 
and remove the safety clips .
 Take out the cutlery tray completely.
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 7362G 7365G 7367G 7372G 7377G 7360

Table of Contents