Remote Control - Sharp HT-SB600 Operation Manual

Audio connections to TVs, DVD
players, VCRs, etc. (continued)
To select DIGITAL IN 1 (optical input) or DIGITAL IN 2
(coaxial input) function:
On main unit: Press INPUT button repeatedly until
"DIGITAL 1" or "DIGITAL 2" appears on the
display.
On remote Press the "DIGITAL 1" or "DIGITAL 2"
control: button.
To select LINE IN 1 or LINE IN 2 function:
On main unit: Press INPUT button repeatedly until
"LINE 1" or "LINE 2" appears on the
display.
On remote Press the "LINE 1" or "LINE 2" button.
control:

Remote Control

Battery installation
Use 2 "AAA" size batteries (UM/SUM-4, R3, HP-16 or
similar). Batteries are not included.
Plastic film covering can be removed or peeled off.
1
Open the battery cover.
2
Insert the batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them
toward the battery terminals.
3
Close the battery cover.
Caution:
●
Replace all old batteries with new ones at the same
time.
●
Do not mix old and new batteries.
●
Remove the batteries if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
●
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
●
Installing the batteries incorrectly may cause the unit to
malfunction.
●
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Remote Control (continued)
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
●
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit.
●
Keep the remote control away from moisture, heat,
shock, and vibrations.
Test of the remote control
Point the remote control directly at the remote sensor on
the main unit.
The remote control can be used within the range
shown below:
8" - 20"
(0.2 m - 6 m)
E-15
Remote sensor
15° 15°
HDMI
ARC
1 2 3
TV