Specifications - Sharp PN-L602B Operation Manual

nProduct Specifications
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Viewing angle
Screen active area
Computer input signal
Sync signal
Video color system
Plug and play
Power management
Input terminals PC/AV
PC
Audio
Serial (RS-232C)
When PN-ZB01 PC/AV
(optional) is
PC
attached
AV
Audio
Output terminals Audio
Serial (RS-232C)
When PN-ZB01 PC/AV
(optional) is
External speaker
attached
LAN terminal
[ When PN-ZB01 (optional) is attached ]
Speaker output
Touch Panel Detection method
Detection area
PC connector
Power supply
Touch pen
Power requirement
Operating temperature * *
3
Operating humidity *
4
Power consumption
(Maximum / input signal waiting mode *
mode * )
6
Power consumption
[ When PN-ZB01 (optional) is attached ]
Dimensions (excluding protrusions)
Weight
Weight [PN-ZB01 (optional)]
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*4 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*5 When AUTO INPUT CHANGE is set to OFF.
*6 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Specifications

PN-L602B
60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD
(pixels) 1920 x 1080
Approx. 1.06 billion colors
0.692 mm (H) × 0.692 mm (V)
160° right/left/up/down (contrast ratio ≥ 10)
inch (mm) 52-5/16 x 29-7/16 (1329.1 x 747.6)
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω]
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
VESA DDC2B
VESA DPMS, DVI DMPM
Digital HDMI x 1
Analog Mini D-sub 15 pin, 3 rows x 1
3.5 mm mini stereo jack x 1
D-sub 9 pin x 1
Digital DVI-D 24 pin (HDCP compatible) x 1
Analog BNC *
Composite video BNC x 1
x 1
S-video
Component BNC (Y, Cb/Pb, Cr/Pr) *
RCA pin (L/R) x 2
RCA pin (L/R) x 1
D-sub 9 pin x 1
Digital DVI-D 24 pin x 1
7 W + 7 W [6 Ω]
10 BASE-T/100 BASE-TX
7 W + 7 W
Infrared blocking detection method
inch (mm) 52-5/16 x 29-7/16 (1329.1 x 747.6)
USB (1.1 compliant)
Supplied from USB
Ultrasonic communication method
AC 100 V - 240 V, 2.0 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
4
20% to 80% (no condensation)
165 W / 1.0 W / 1.0 W
/ standby
5
170 W
inch (mm) Approx. 56-11/16 (W) x 4 (D) x 33-11/16 (H) (1,440 x 101 x 855)
lbs. (kg) Approx. 119.0 (54)
lbs. (kg) Approx. 1.102 (0.5)
* x 1
1 2
x 1
1
53
E