Table of Contents
Advertisement
▶
PEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed
devices.
[Auto]
[Gen1]
[Gen2]
[Gen3]
▶
PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
▶
ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the
sub-menu.
▶
Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color]
[Blinking]
▶
Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
<Enter> to enter the sub-menu.
▶
Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
▶
LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when Onboard LAN Controller is enabled.
[Enabled]
[Disabled]
▶
Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled]
[Disabled]
▶
Ipv4 PXE Support [Enabled])
When "Enabled", the system UEFI network stack will support Ipv4 protocol. This
item will appear when "Network Stack" is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
56
BIOS Setup
This item will be configured automatically by BIOS.
Enables PCIe Gen1 support only.
Enables PCIe Gen2 support only.
Enables PCIe Gen3 support only.
The power LED turns to another color to indicate the S3 state.
The power LED blinks to indicate the S3 state.
Enables the onboard LAN Boot ROM.
Disables the onboard LAN Boot ROM.
Enables UEFI network stack.
Disables UEFI network stack.
Advertisement
Table of Contents
