MSI Z170A XPOWER GAMING TITANIUM EDITION User Manual page 102

Removing a RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID
drives will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key
to select a RAID volume for deletion. Then press Delete key to delete the selected
RAID volume. The following screen appears.
Press Y key to accept the volume deletion.
Resetting Disks to Non-RAID
Select option Reset Disks to Non-RAID from the main menu screen and press Enter
to delete the RAID volume and remove any RAID structures from the drives. Use
the Space key to select the disks and press Enter key. A confirmation sentence will
appear below, and then press Y key to accept the selection
RAID Configuration
102
Name Level
Volume0 RAID1(Mirror)
[
DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete "Volume0"? (Y / N) :
Deleting a volume will reset the disks to non-RAID.
WARNING :
(This does not apply to Recovery volumes)
[ ↑↓] - Select
1. Create RAID Volume
2. Delete RAID Volume
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk. [ DISK / VOLUME INFORMATION
RAID Volumes :
WARNING : Resetting a disk causes all data on the disk to be lost.
None defined.
(This does not apply to Recovery volumes)
Port Drive Model
Physical Devices :
1 XXXX-XXXXXXXX
Port Device Model Serial #
2 XXXX-XXXXXXXX
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX
Select the disks that should be reset.
[ ↑↓] - Previous/ Next
[ ↑↓] - Select
[ DELETE VOLUME MENU ]
Drives Capacity Status
2 XXX.XGB Normal
]
[ HELP ]
ALL DISK DATA WILL BE DELETED.
[ESC] - Previous Menu [DEL] - Delete Volume
MAIN MENU
[ ]
4. Recovery Volume Options
[ 4. ] Recovery Volume Options
RESET RAID DATA
5. Exit
Serial #
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXX.XGB
XXX.XGB
[SPACE] - Selects [ENTER] - Selection Complete
[ESC] - Exit [ENTER] - Select Menu
Bootable
Yes
]
Size Status
XXX.XGB Member Disk
Size Type/Status (Vol ID)
XXX.XGB Member Disk
Non-RAID Disk
Non-RAID Disk