Setting Up A Washing Machine Connected To Someone Else's Account; Remote Control Function And Using It - Beko B3WT5841WS User Manual

If you cannot successfully perform
the setup within 5 minutes, your
washing machine will turn off auto-
matically In this case, you will have
to start over the setup procedure. If
the problem persists contact the Au-
thorised Service Agent.
You can use your washing machine
with more than one smart appliance.
In order to do this, download the
HomeWhiz application to the other
smart appliance. When you launch
the application, you must log into the
account you previously created and
paired with your washing machine.
Otherwise, please read "Setting up a
washing machine that is connected
to someone else's account".
You need internet connection on
your smart device to proceed with
HomeWhiz setup. Otherwise, the
HomeWhiz application will not let
you finish the setup procedure suc-
cessfully. Please contact your inter-
net service provider if you are having
problems with your internet connec-
tion
HomeWhiz Application may require
you to type the product number
shown on the product label. You can
find the product label inside of the
appliance door. The product number
is located on this label.
6.15.2 Setting up a Washing Ma-
chine Connected to
Someone Else's Account
If the washing machine that you want to use
has been previously registered to the system
with someone else's account, you need to
establish a new connection between your
HomeWhiz App and the appliance.
a. Download HomeWhiz Application on the
new smart device you want to use.
b. Create a new account and log in to this
account on the HomeWhiz app.
c. Follow the steps described in HomeWhiz
Setup (HomeWhiz Setup) and proceed
with the setup procedure.
Since the HomeWhiz Feature and
Remote Control function on your ap-
pliance is operated via pairing using
Bluetooth technology only one
Homewhiz application can operate it
at a time.
6.15.3 Remote Control Function
and Using It
Bluetooth is automatically turned on after
setting up HomeWhiz. To activate or deac-
tivate the Bluetooth connection, please see
Bluetooth 3'''.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatically
turn off. For this reason, you will need to turn
on the bluetooth again if you want to use the
Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If the
symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, it means you are not connec-
ted.
EN / 35