Table of Contents
Advertisement
15 Basic settings
You can configure the appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Language
Clock
Factory setting
Audible signal
Volume
Button tone
Display brightness
Clock display
Lighting
Childproof lock
Operation after switch-
on
Night-time dimming
Brand logo
Fan run-on time
Factory setting (may vary according to model)
1
16 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
16.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
Selection
See selection on the appli-
ance.
Clock in 24-hour format.
Reset
1
Do not reset
Short duration (30 seconds)
Medium duration (1 minute)
Long duration (5 minutes)
5 settings
Switched on
Switched off (tone remains
1
for
)
5 settings
Off
1
Digital
Analogue
Off during operation
1
On during operation
1
Button lock only
Door lock and button lock
Main menu
1
Types of heating
Assist
1
Switched off
Switched on
1
Display
Do not display
1
Recommended
Minimum
Basic setting
Pull-out system
Sabbath mode
Factory setting (may vary according to model)
1
15.2 Changing the basic settings
Requirement: The appliance is switched on.
Press
1.
1
Press "Basic settings".
2.
Press the required basic setting and use the control
3.
ring to change it.
The red bar next to the text field identifies the basic
setting that is currently selected. Its corresponding
value is shown in the display.
Use "Further settings" to scroll through the basic
4.
settings and, if required, use the control ring to
change any of these settings.
To save your changes, press
5.
to confirm.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
Press
▶
a All changes will be discarded and not saved.
15.3 Setting the time
Requirement: The appliance is switched on.
Press
1.
Press "Basic settings".
2.
Press "Time".
3.
Use the control ring to change the time.
4.
To save your changes, press
5.
to confirm.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners for cleaning the ap-
▶
pliance while it is hot.
Basic settings en
Selection
Not retrofitted (if shelf sup-
ports and a single set of
pull-out rails are fitted)
Retrofitted (if two or three
sets of pull-out rails are fit-
ted)
Switched on
1
Switched off
.
and use "Do not save" to confirm.
.
1
and use "Save"
and use "Save"
19
Advertisement
Table of Contents
