Table of Contents
Advertisement
en Accessories
Accessories
Wire rack
Universal pan
Baking tray
Meat thermometer
6.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
6.2 Sliding accessories into the cooking
compartment
Always slide the accessory into the cooking compart-
ment the right way round. This is the only way to en-
sure that accessories can be pulled out approximately
halfway without tipping.
Turn the accessories so that the notch
1.
rear and is facing downwards.
Insert the accessory between the two guide rods for
2.
a shelf position.
10
Wire rack
Baking tray
E.g. univer-
sal pan or
baking tray
is at the
To place the accessory at shelf positions with pull-
3.
out rails, pull out the pull-out rails.
Wire rack
or baking
tray
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack.
¡ Tray bakes
¡ Small baked items
High-precision roasting or cooking.
→ "Meat probe", Page 14
Insert the wire rack with the open
side facing the appliance door and
the curved lip facing downwards.
Slide the tray in with the sloping
edge towards the appliance door.
Position the accessory so that its
edge is behind the lug on the pull-
out rail.
Advertisement
Table of Contents
