KanexPro SP-HDPOC1X4 Quick Start Manual
  1. Manuals
  2. Brands
  3. KanexPro Manuals
  4. Amplifier
  5. SP-HDPOC1X4
  6. Quick start manual

KanexPro SP-HDPOC1X4 Quick Start Manual

1x4 distribution amplifier over cat5e/6 outputs and poc 60m
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1x4 Distribution Amplifier over
CAT5e/6 Outputs and PoC 60M
MPN: SP-HDPOC1X4
VER 1.0
All brand names and trademarks are properties of their respective owners

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-HDPOC1X4 and is the answer not in the manual?

Questions and answers

Related Manuals for KanexPro SP-HDPOC1X4

Summary of Contents for KanexPro SP-HDPOC1X4

  • Page 1 1x4 Distribution Amplifier over CAT5e/6 Outputs and PoC 60M MPN: SP-HDPOC1X4 VER 1.0 All brand names and trademarks are properties of their respective owners...

  • Page 2: Table Of Contents

    7. ASCII Commands. 8. Application Example. 1. Introduction： The KanexPro 1x4 Distribution Amplifier (SP-HDPOC1X4) is a 18Gbps HDMI 1x4 Splitter can send a single HDMI source signal to any 4 display devices. Support video resolution up to 4K2K@50/60Hz 4:4:4. It is designed with 1 HDMI loop output and 4 CAT outputs.

  • Page 3: Specifications

    4. Specifications: Input: AC100 - 240V 50/60Hz, Output: DC 12V/2.5A Power Supply (US/EU standards, CE/FCC/UL certified) Technical Power Consumption Operation Temperature 0°C ~ 40°C / 32°F ~ 104°F HDMI Compliance HDMI 2.0 Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F HDCP Compliance HDCP 2.2/1.x Relative Humidity...

  • Page 4: Cat Receiver

    Rear Panel 5.2 CAT Receiver Name Function Description AUDIO OUT Coaxial/analog audio output port, connect to amplifier or Name Function Description (COAX, L/R) speaker. HDMI output port, connect to HDMI display device such as TV IN: HDMI input port, connect to HDMI source device such as HDMI OUT or Projector with an HDMI cable.

  • Page 5: Edid Mode

    6. EDID Mode: 7. ASCII Commands: The defined EDID setting list of the product is shown as below: The product also supports ASCII command control. Connect the SERVICE port of the product to a PC with an USB cable. Then, open a Serial Command tool on PC to send ASCII commands to control the Technical product.
  • Page 6 Command Function Description Example Feedback Default Setting Command Function Description Example Feedback Default Setting Output Setting EDID Setting Set input EDID from default Set hdmi loop EDID z, z=1~30 Enable hdmi loop out stream s hdmi stream z! output stream on/off s hdmi stream 1 ! enable 1, 1080p,Stereo Audio 2.0...

  • Page 7: Application Example

    8. Application Example: The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Table of Contents