Pop Server Name - Sony IPELA SNC-P5 User Manual

Note
When you set to On, be sure to select either or both
SMTP or/and POP before SMTP.

POP server name

It is necessary when the POP before SMTP is selected
in Authentication.
Type the POP (receiving mail) server name up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends
e-mails performs authentication using the POP user
account.
User name, Password
Type the user name and password of the user who has
the mail account. This setting is necessary when the
SMTP server which sends e-mails performs
authentication.
Recipient e-mail address
Type the address to which you send e-mails to up to 64
characters. If you want to send to two or more addresses,
set them in the e-Mail (SMTP) setting menu (page 50) of
the Advanced mode menu.
Administrator e-mail address
Type the e-mail address of the administrator of the
camera up 64 characters.
This will be the address for return mail and system mail
from the mail server.
Subject
Type the subject up to 64 characters.
Message
Type the text up to 384 characters (Return corresponds
to two characters).
Mode
Set the e-mail sending mode.
Motion detection: When the camera detects any action,
it sends the image file.
If you select Motion detection, the camera detects
activity in the shooting image due to the built-in motion
detection function. Then the camera sends the e-mail
with the attached image file.
Set the details of the motion detection of the camera in
the Motion detection setting menu (page 65) of the
Advanced mode menu.
32
Basic Operations of Easy mode
Note
The picture attached to the e-mail is of the moment the
motion detection function of the camera works. If the
next activity is detected during processing of the image
of the first detection, the process will be rejected.
The motion detection function may not work properly in
the following cases.
• During camera setting operation in the Camera setting
menu.
• When the object is dark.
• When the camera is shaken because the installation
location is unstable.
Periodical sending: The image file is sent regularly.
After checking it, select Every 1 hour or Every 6
hours.
Every 1 hour: The camera sends the e-mail with
attached image file every 1 hour.
Every 6 hours: The camera sends the e-mail with
attached image file every 6 hours.
OK
Click this after setting.
When you click it, the dialog "Send a test mail?"
appears. When you send a test mail to the address you
have set, select OK. If you do not wish to send it, select
Cancel.
Cancel
Click to return to the previous condition by canceling the
setting.