[Waveform] On/Off N, E8; False Color Mode N, E9 - LG CSAB-0072 Owner's Manual

119. [Vectorscope] On/Off (Command: s n, e7)
Adjusts the Vectorscope On/Off.
Transmission
(s)(n)( )(Set ID)( )(e)(7)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(e)(7)(Data)(x)
* It may not be supported depending on the model.
120. [Waveform] On/Off (Command: s n, e8)
Adjusts the Waveform On/Off.
Transmission
(s)(n)( )(Set ID)( )(e)(8)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(e)(8)(Data)(x)
* It may not be supported depending on the model.
121. False Color Mode (Command: s n, e9)
Sets the False Color Mode.
Transmission
(s)(n)( )(Set ID)( )(e)(9)( )(Data)(Cr)
Data 00: Off
01: Run the Zebra Pattern
02 : Run the Color Pattern
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(e)(9)(Data)(x)
* It may not be supported depending on the model.
122. False Color – Zebra (Command: s n, ea)
Sets the False Color and Zebra Pattern.
Transmission
(s)(n)( )(Set ID)( )(e)(a)( )(Data)(Cr)
Data 00~64: Zebra pattern 0~100
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(e)(a)(Data)(x)
* It may not be supported depending on the model.
123. False Color – Color (Command: s n, eb)
Sets the False Color and Color Pattern.
Transmission
(s)(n)( )(Set ID)( )(e)(b)( )(Data)(Cr)
Data 00~64: Color pattern 0~100
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(e)(b)(Data)(x)
* It may not be supported depending on the model.
124. SDR/HDR Signal Format (Command: s n, ec)
Sets the SDR/HDR Signal Format.
Transmission
(s)(n)( )(Set ID)( )(e)(c)( )(Data)(Cr)
Data 00: Auto
01: SDR
02: HDR
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(e)(c)(Data)(x)
* It may not be supported depending on the model.
115