LG CSAA-009X Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. CSAA-009X
  6. Owner's manual
LG CSAA-009X Owner's Manual

LG CSAA-009X Owner's Manual

Hide thumbs Also See for CSAA-009X:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
LG LED Signage
( SYSTEM CONTROLLER)
Please read this manual carefully before operating your set
and retain it for future reference.
CSAA-009X
CSAA-009X2
CSAA-012X
CSAA-012X3
CSAA-012X5
CSAA-012K
CSAB-00913
CSAB-00914
CSAB-0092
CSAB-00922
CSAB-009X
CSAB-0093
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
CSAB-0121
CSAB-01212
www.lg.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSAA-009X and is the answer not in the manual?

Questions and answers

Related Manuals for LG CSAA-009X

Summary of Contents for LG CSAA-009X

  • Page 1 ( SYSTEM CONTROLLER) Please read this manual carefully before operating your set and retain it for future reference. CSAA-009X CSAA-012X CSAB-00913 CSAB-0121 CSAA-009X2 CSAA-012X3 CSAB-00914 CSAB-01212 CSAA-012X5 CSAB-0092 CSAA-012K CSAB-00922 CSAB-009X CSAB-0093 www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS SAFETY PRECAUTIONS .....4 SETTINGS ........ 33 - Precautions for the AC Adapter and Power . 5 - Home ................33 - Precautions for Moving the Product ....7 - Ez Setting ..............34 - Precautions for Installing the Product ..... 8 - General ................
  • Page 3 REMOTE CONTROL ....117 MAKING CONNECTIONS ..119 - Connecting with LAN Cable ......119 - Connecting to PC ..........121 - Connecting to External Devices ....122 - Using the Input List..........122 - Connecting Multiple Monitors ....... 123 CONNECT A USB DEVICE ..

  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.

  • Page 5: Precautions For The Ac Adapter And Power

    • Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is certified by the national standards. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorised service center for a replacement.
  • Page 6 • If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the power cord or AC adapter away from any heating devices. - The cord coating may melt and cause fire or electric shock.

  • Page 7: Precautions For Moving The Product

    Precautions for Moving the Product WARNING • Contact the service center before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted or the product can be damaged.

  • Page 8: Precautions For Installing The Product

    Precautions for Installing the Product WARNING • Contact the service center before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product to prevent throwing things on the product screen.
  • Page 9 CAUTION • Install the product where no Electromagnetic Interference occurs. • If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places such as where there is an abundance of fine dust or oil mist, chemical substances are used, exposed to direct sunlight, the temperature is very high or low, the humidity is very high.

  • Page 10: Precautions For Cleaning The Product

    Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service center. - Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product.

  • Page 11: Precautions For Using The Product

    Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. - It may cause electrical shock or damage the product. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired vision.
  • Page 12 • Do not use high voltage electrical goods near the product (e.g., a bug zapper). - This may result in product malfunction if it receives an electrical shock. • If there is a gas leak, do not touch the outlet, and open the windows for ventilation. - Otherwise, the product may cause fire or electric shock.

  • Page 13: Precautions For Using The Remote Control

    Precautions for Using the Remote control WARNING • Avoid places with high humidity. - It may cause electrical shock or damage the product. • Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. - It may cause fire and you may be injured.

  • Page 14: Product Disposal

    Product Disposal • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority.

  • Page 15: Assembling And Preparing

    ASSEMBLING AND PREPARING CAUTION • Always use genuine components to ensure safety and durability of the product. • The product warranty will not cover damage or injury caused by the use of unauthorised components. • Replacing the batteries with the wrong type may result in explosion. •...

  • Page 16: How To Connect A Cable To The Ir-Apl Ports

    How to Connect a Cable to the IR-APL Ports • Use an IR-APL LAN cable that is less than 5 meters long. • IR-APL connection synchronizes the average picture level (APL) across products. Dynamic Brightness should be turned on during this process. • A LAN cable should connect to the IR-APL ports in a closed loop. Refer to the basic connection layout below on how to connect a cable.

  • Page 17: Precautions For Using The Ir-Apl Port

    Precautions for Using the IR-APL Port • Use the ferrite core to reduce the electromagnetic interference in the IR-APL LAN cable. Wrap the IR-APL LAN cable once on the ferrite core B and 3 times on the ferrite core A. Place the ferrite core close to the set and an external device.

  • Page 18: Optional Accessories

    Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and optional accessories. LED Screen LSAA012-MX*, LSAA012-QX*, LSAA012-NX*, LSAA012-UX*, LSAA012-SX*, LSAA012-TX* LSAA012-MK, LSAA012-QK, LSAA012-NK, LSAA012-UK, LSAA012-SK, LSAA012-TK LSAA009-MX*, LSAA009-QX*, LSAA009-NX*, LSAA009-UX*, LSAA009-SX*, LSAA009-TX*...

  • Page 19: Parts And Buttons

    Parts and Buttons The illustrations may differ depending on the model. Explanation • Turns the power on and off. • Switches to HDMI 1 input. • Switches to HDMI 2 input. • Switches to HDMI 3 input. • Switches to DP input. •...
  • Page 20 LAN-03 LAN-05 LAN-06 LAN-07 LAN-01 LAN-04 AC-IN IR-APL HDMI 1 HDMI 2 HDMI 3 LAN IN...

  • Page 21: Rack Installation (Optional)

    Rack Installation (Optional) Rack (*Not provided) NOTE • Use the bolts included in the rack to fasten the product.

  • Page 22: Ir Receiver

    IR Receiver This allows a remote control sensor to be placed in a custom location. All products can receive signals normally after the infrared receiver terminal (IR & LIGHT SENSOR) is connected to the IR. IR Receiver...

  • Page 23: Installation Guide

    LG LED Signage (SYSTEM CONTROLLER) CSAA-009X CSAB-00913 CSAB-0093 CSAB-0121 CSAA-009X2 CSAB-00914 CSAB-01212 CSAA-012X CSAB-0092 CSAA-012X3 CSAB-00922 CSAA-012X5 CSAB-00923 CSAA-012K CSAB-009X x 12 (M4 x L6) Depending on country / Závisí na zemi / Afhængigt af landet / En función del país / Maan mukaan / Selon pays / Abhängig vom Land / Ανάλογα...
  • Page 24 ʣ Worldwide : www.lg.com/id-manual ʣ 한국 : www.lgservice.co.kr ʣ SuperSign : http://partner.lge.com...
  • Page 29 (M4 x L6)
  • Page 32 LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

  • Page 33: Settings

    SETTINGS Home Global Buttons CSAB, CSAA, CSAC, CBAE, CBAF, CBAA • [MOBILE URL]: Provides information necessary to access the monitor set through an external device's browser. With this feature, you can view QR code and URL information. In addition, by accessing the URL, you can also run Content Manager and Group Manager 2.0, and Control Manager.

  • Page 34: Ez Setting

    Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. • [Tile Mode]: Turn [Tile Mode] on or off. • [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •...
  • Page 35 [SI Server Setting] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Ez Setting] [SI Server Setting] [SI Server Setting] Set up to connect your signage to an external SI server. Set up a server environment for SI app installation. [Ez Setting] [SI Server Setting] [Developer Mode &...
  • Page 36 [Fail Over] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Ez Setting] [Fail Over] Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the set app. • [On/Off]: Turns [Fail Over] on or off. •...
  • Page 37 [Status Mailing] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Ez Setting] [Status Mailing] This feature configures the system so that the status of the device is assessed and then notified to the administrator by e-mail. • [On/Off]: Turns [Status Mailing] on or off. •...
  • Page 38 [Play via URL] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. • [URL Loader]: Turns [Play via URL] on or off. • [Set URL]: Enter the URL address to display automatically. •...
  • Page 39 [LG ConnectedCare (Signage 365 Care)] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Ez Setting] [LG ConnectedCare (Signage 365 Care)] You can install the LG ConnectedCare (fault diagnosis) solution for fault diagnosis and prediction service. • [Install]: Installs the LG ConnectedCare solution.
  • Page 40 [Multi Screen] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Ez Setting] [Multi Screen] This feature allows you to view multiple external inputs and videos on a single screen. PIP Mode PBP Mode 3-Screen Split Mode 4-Screen Split Mode NOTE • In multi-screen mode, the DP daisy chain feature is not supported. •...
  • Page 41 Changing Screen Input Press the button on the top right of each split screen to select the desired input. NOTE • Inputs which have already been selected for other split screens cannot be selected again. To select them, press the RESET button to reset the inputs for all screens first.
  • Page 42 [Office Meeting Mode] [Ez Setting] [Office Meeting Mode] You can set up Quick Functions to use the product in a conference room. • Office Meeting Mode: Turning on this feature enables you to set functions related to the conference room meeting mode.

  • Page 43: General

    General [Language] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [General] [Language] You can select the menu language to be displayed on the screen. • [Menu Language]: Sets the language of your Signage monitor. • [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [General]...
  • Page 44 [Time & Date] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [General] [Time & Date] This feature enables you to view and change the time and date on the device. • [Set Automatically]: Set [Time] and [Date]. • [Daylight Saving Time]: Set the start and end times for Daylight Saving Time. The DST start/end times function only when you set them more than one day apart from each other.
  • Page 45 [DPM] / [DPM (Standby Mode)] Set the Display Power Management (DPM) mode. • If this feature is not set to [Off], the monitor will enter DPM mode when there is no input signal. • If you set this feature to [Off], [DPM] / [DPM (Standby Mode)] is disabled. NOTE •...
  • Page 46 [Wake On LAN] / [Wake On LAN (Networked Standby Mode)] • Set whether to use [Wake On LAN] / [Wake On LAN (Networked Standby Mode)]. • You can set the feature to On or Off for each wired/wireless network. • [Wired]: When set to [On], the [Wake On LAN] / [Wake On LAN (Networked Standby Mode)] feature is enabled, letting you turn the product on remotely through a wired network.
  • Page 47 [Certificate Download] • Download the certificates used for 802.1X EAP stored in USB. • Only pem file extension can be downloaded. NOTE • On models that support Wi-Fi dongles, the Wireless Network Connection menu is enabled only when a Wi-Fi dongle is connected.
  • Page 48 For details, contact your ISP. • LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment.
  • Page 49 Tips for When Configuring Wireless Network Settings • The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices.
  • Page 50 2.4GHz. • When you set iBeacon, LG Beacon will be set to be the same as the value of iBeacon field. But the LG Beacon setting item won’t be provided separately.
  • Page 51 [Control Interface] Devices connected to the display can be controlled via the interface. • [PC/OPS Power Control]: Enable you to control the power of PC or OPS as you turn the display on and off. - [Disable]: Disable [PC/OPS Power Control]. - [Sync(On)]: Set the PC/OPS power to be turned on when the display is turned on.
  • Page 52 [SIMPLINK Setup] • When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. • [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
  • Page 53 This mode is used to reduce the noise of the fan. Adjusted to the set fan control and brightness. [LG promota] This feature allows connection of promota app on mobile device. For more information on how to use it, please visit the promota website (https://www.promota.net/)

  • Page 54: Display

    Display [Picture Mode] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. • [Mall/QSR], [Transportation], [Education], [Gov./Corp.]: Display the picture optimally for your installation environment. •...
  • Page 55 [Customize] • [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. • [OLED Light]: Adjusts the brightness of the LED panel to control the brightness of the screen. •...
  • Page 56 • [Picture Option]: Customize the picture options. - [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. - [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. - [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen. (Recommended settings based on input signals: RGB 0 - 255: High, RGB 16 - 235: Low, YCbCr: Low) - [Real Cinema]: Optimize the video image for a cinematic look.
  • Page 57 [Advanced Setting] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Display] [Advanced Setting] [UHD Deep Color] If you connect an HDMI, DP, or OPS device to one of the Deep Color adjustable ports, you can select between UHD Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu. If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz, set the Deep Color option back to Off.
  • Page 58 [Adjustment (RGB-PC)] Set PC display options in RGB mode. • Intelligent Auto : Select Enable auto-tuning for the first recognized resolution of the RGB input. • [Set Automatically]: Sets the screen position, clock, and topology to be automatically adjusted. The image may display unstable for a few seconds while the configuration is in progress.
  • Page 59 [LED Local Dimming] Make the light areas of the screen lighter and the dark areas darker for maximum contrast. NOTE • Return to default settings by clicking [Admin] -> [Factory Reset]. [Average Picture Level Auto Control] Can use image quality control based on APL (Average Picture Level) of the monitor input image. When using the monitor as a Video Wall, it is recommended to set this function off to prevent an image quality difference between the monitors.
  • Page 60 [Phase Shift] Phase Shift can make adjustment of LED screen output timming. LED screen can adjust timing manually to remove visual artefacts with Phase Shift, if camera recoding result make double image(double frame). • Range : 0~360 (0: Don’t use Phase Shift, 180: 0.5 Frame delay added) NOTE •...

  • Page 61: Sound

    Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. • [Standard]: This sound mode works well for content of all types. • [Cinema]: Optimize sound for watching movies. •...
  • Page 62 Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned • It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.
  • Page 63 [External Speaker] (0~15): Adjust the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. The larger the number is, the slower the voice output is than the default value.

  • Page 64: Admin

    Admin [Lock Mode] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.
  • Page 65 [Change Password] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000) Enter your current password. Enter a new 6-digit password. Enter the same password again in the Confirm Password field for confirmation. [Enterprise Settings] CSAB, CSAA, CSAC, CBAE, CBAF, CBAA •...

  • Page 66: Content Manager

    CONTENT MANAGER Web Login • Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •...
  • Page 67 [Delete] Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. Select the content you wish to delete. Click [Delete] in the upper right-hand corner of the screen. You can see that the content has been deleted.
  • Page 68 [Scheduler] (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] Click [New Schedule] in the upper right-hand corner of the screen. Choose between [Playlist] and [Input Source]. 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of.
  • Page 69 [Delete Schedule] Click [DELETE] in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click [DELETE]. Check that the schedules have been deleted. [Calendar View] When you have registered schedules, click [Calendar View]. You can see that the schedules registered are displayed in the form of a timetable. [Distribute] Click [Distribute] in the upper right-hand corner of the screen.
  • Page 70 Supported Photo & Video Files NOTE • Subtitles are not supported. • The photo feature is not supported in OLED model. Supported video codecs Extension Codec .asf, .wmv Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) .avi...
  • Page 71 Supported Photo File Formats File type Format Resolution .jpeg, .jpg, .jpe JPEG • Minimum: 64 x 64 • Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) .png • Minimum: 64 x 64 • Maximum: 5760 (W) x 5760 (H) .bmp •...
  • Page 72 • If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. • If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •...

  • Page 73: Group Manager 2.0

    Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device.
  • Page 74 [GROUP MANAGEMENT] • Creating a New Group 1. Click [Add New Group]. 2. Enter a group name. 3. Click [Add Device], select the devices you wish to add to the group, and add them. 4. Click [Done], and you will see that a new group has been created. •...
  • Page 75 [Setting Data Cloning] Select your desired group and click Clone. Check that the data have been copied on the slave sets. [Content Distribute] Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click [Distribute].

  • Page 76: Gallery Mode

    Gallery Mode CSAB, CSAA, CSAC, CBAE, CBAF, CBAA This mode allows you to appreciate the natural environment and famous paintings. Open the [Gallery Mode] app. • You can click and play the representative theme image that appears in the middle of the screen, or click the theme preview image that appears at the bottom of the screen to play.

  • Page 77: Screenshare

    ScreenShare CSAB, CSAA, CSAC, CBAA This feature allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. How to Use [ScreenShare] [ScreenShare] Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right.

  • Page 78: Management Tools

    MANAGEMENT TOOLS Control Manager Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function • [Dashboard]: Display a summary of the product's status and provides links to each page. •...

  • Page 79: Picture Id

    Picture ID CSAB, CSAA, CSAC, CBAE, CBAF, CBAA AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each RS-232C IN RS-232C IN RS-232C IN...

  • Page 80: Ir Code

    IR CODE • All models do not support the HDMI/USB function. • Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button (Power) MONITOR ON Remote control button MONITOR OFF Remote control button Remote control button INPUT (Select input) Remote control button...
  • Page 81 Code (Hex) Function Remarks (Settings/Menu) Remote control button Auto Configuration Remote control button (Up) Remote control button (Down) Remote control button Remote control button (Right) (Left) Remote control button Remote control button (OK) (BACK) Remote control button Tile Remote control button Exit Remote control button Picture ID On (red)

  • Page 82: Controlling Multiple Products

    CONTROLLING MULTIPLE PRODUCTS • This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •...

  • Page 83: Communication Parameter

    Communication Parameter NOTE • When using 3-wire connections (non-standard), an IR Baud Rate: 9600 BPS daisy chain cannot be used. Data Length: 8 bits • Be sure to only use the provided gender to connect Parity Bit: None properly. Stop Bit: 1 bit •...

  • Page 84: Command Reference List

    Command Reference List Command Data (Hexadecimal) [Power] 00 to 02 Select Input See Select Input [Aspect Ratio] See [Aspect Ratio] [Brightness Control] 00 to 04 [Picture Mode] See [Picture Mode] [Contrast] 00 to 64 [Brightness] 00 to 64 [Sharpness] 00 to 32 [Color] 00 to 64 [Tint]...
  • Page 85 Command Data (Hexadecimal) Check product serial number [Software Version] [White Balance] Red Gain 00 to FE [White Balance] Green Gain 00 to FE [White Balance] Blue Gain 00 to FE [White Balance] Red Offset 00 to 7F [White Balance] Green Offset 00 to 7F [White Balance] Blue Offset 00 to 7F...
  • Page 86 Command Data (Hexadecimal) [Network Setting] n, 80(81)(82) See [Network Setting] [Power On Status] 00 to 02 Wired [Wake On LAN] / [Wake On 00 to 01 LAN (Networked Standby Mode)] [Screen Rotation] 00 to 03 [Time Sync] n, 16 00 to 01 [Contents Sync] 00 to 01 [LAN Daisy Chain]...
  • Page 87 Command Data (Hexadecimal) [Wi-Fi Lock] n, 9f 00 to 01 [Screen Share Lock] n, a0 00 to 01 [Backup via Storage] n, a1 See [Backup via Storage] [Digital Audio Input] n, a2 00 to 01 [Booting Logo Image] n, a3 00 to 01 [SoftAP] n, a4...
  • Page 88 Command Data (Hexadecimal) [Frame Control] n, b7 00 to 01 [Average Picture Level Auto n, be 00 to 01 Control] Read Brightness Value [Screen Fault Detection] 00 to 01 [Stereo Mode] n, c2 00 to 02 [HDR Picture Mode] n, c4 See [HDR Picture Mode] [Dynamic Tone Mapping] n, c5...

  • Page 89: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes. * (Command2): This command is used to control the monitor. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to 3E8H) under Settings in the OSD menu.
  • Page 90 01. [Power] (Command: k a) E8: SI App F0 : SDI 1 Controls the power on/off status of the monitor. F1 : SDI 2 Transmission F2 : SDI 3 (k)(a)( )(Set ID)( )(Data)(Cr) F3 : SDI 4 Data 00: [Off] F4 : SDI DUAL 12 01: [On] F5 : SDI DUAL 34...
  • Page 91 05. [Picture Mode] (Command: d x) 06. [Contrast] (Command: k g) Selects a picture mode. Adjusts the screen contrast. Transmission Transmission (d)(x)( )(Set ID)( )(Data)(Cr) (k)(g)( )(Set ID)( )(Data)(Cr) Data 00: [Mall/QSR] Data 00-64: Contrast 0-100 01: [General] Acknowledgment 02: [Gov./Corp.] (g)( )(Set ID)( )(OK/NG)(Data)(x) 03: [Transportation] 04: [Education]...
  • Page 92 10. [Tint] (Command: k j) 13. [Sound Mode] (Command: d y) Adjusts the screen tints. Selects a sound mode. Transmission Transmission (k)(j)( )(Set ID)( )(Data)(Cr) (d)(y)( )(Set ID)( )(Data)(Cr) Data 00-64: Tint Red 50-Green 50 Data 01: [Standard] 02: [Music] Acknowledgment 03: [Cinema] (j)( )(Set ID)( )(OK/NG)(Data)(x)
  • Page 93 16. [Current Time] 1 (year/month/day) (Command: 18. [No Signal Power Off(15Min)] (Command: f g) f a) Sets the monitor to enter Automatic Standby mode if there is no signal for 15 minutes. Sets the Clock 1 (year/month/day) values and Auto Time. Transmission Transmission (f)(g)( )(Set ID)( )(Data)(Cr)
  • Page 94 21. [Default] Settings (Command: f k) 24. Time Elapsed (Command: d l) Executes Reset. Displays the time that has elapsed after your monitor has turned on. (Initialize Screen can only be executed in RGB input mode.) Transmission Transmission (d)(l)( )(Set ID)( )(Data)(Cr) (f)(k)( )(Set ID)( )(Data)(Cr) Data FF: Read status...
  • Page 95 27. [White Balance] Red Gain (Command: j m) 30. [White Balance] Red Offset (Command: s x) Adjusts the red gain value for white balance. Adjusts the red offset value for white balance. Transmission Transmission (j)(m)( )(Set ID)( )(Data)(Cr) (s)(x)( )(Set ID)( )(Data)(Cr) Data 00-FE: Red Gain 0-254 Data...
  • Page 96 33. [Backlight] (Command: m g) 36. [Tile Mode] Check (Command: d z) Adjusts the backlight brightness. Checks the tile mode. Transmission Transmission (m)(g)( )(Set ID)( )(Data)(Cr) (d)(z)( )(Set ID)( )(Data)(Cr) Data 00-64: Backlight 0-100 Data FF: Check Tile Mode Acknowledgment Acknowledgment (g)( )(set ID)()(OK/NG)(Data)(x) (z)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x)
  • Page 97 39. [DPM] / [DPM (Standby Mode)] (Command: f j) 42. [Fail Over] Mode (Command: m i) Sets the DPM(Display Power Management) function. Selects a sound mode. Transmission Transmission (f)(j)( )(Set ID)( )(Data)(Cr) (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: [Off] Data 00: [Off] 02: 10 seconds 01: [Auto]...
  • Page 98 44. Remote Control Key Lock (Command: t p) 46. Status Check (Command: s v) Configures the settings of the product's remote control key. Checks the current signal of the product. Transmission Transmission (t)(p)( )(Set ID)( )(Data)(Cr) (s)(v)( )(Set ID)( )(Data)( )(FF)(Cr) Data 00: Unlocks all keys Data...
  • Page 99 48. [PM Mode] (Command: s n, 0c) Data 09 (when checking the fan speed) Sets the PM mode. Acknowledgement (v)( )(Set ID)( )(OK/NG)(Data)(Data1_1)(Data1_2) Transmission …(DataN_1)(DataN_2)(x) (s)(n)( )(Set ID)( )(0c)( )(Data)(Cr) Data1_1:00~ff: First fan speed top 1 Byte Data 00: [Power Off] (Basic) Data1_2: 00~ff: First fan speed bottom 1 Byte 01: [Sustain Aspect Ratio] …...
  • Page 100 50. [Network Setting] (Command: s n, 80 or 81 or 51. [Power On Status] (Command: t r) Sets the Power On status of the monitor. Configures network and DNS settings. Transmission Transmission (t)(r)( )(Set ID)( )(Data)(Cr) (s)(n)( )(Set ID)( )(Data1)( )(Data2)( ) Data 00: [LST(Last Status)] (Data3)( )(Data4)( )(Data5)(Cr)
  • Page 101 54. [Time Sync] (Command: s n, 16) 57. [External Input Rotation] (Command: s n, 85) Sets Time Sync. Sets the External Input Rotation feature. Transmission Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) (s)(n)( )(Set ID)( )(8)(5)( )(Data)(Cr) Data 00: [Off] Data 00: [Off] 01: [On] 01: 90 degrees...
  • Page 102 60. [Brightness Scheduling] (Command: s s) 61. [Multi Screen] Mode & Input (Command: x c) Sets Brightness Scheduling. Saves and controls Multi Screen modes and inputs. Transmission Transmission (s)(s)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) (x)(c)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4) ( )(Data5)( )(Cr) Data 1 1.
  • Page 103 62. [Aspect Ratio] (Multi screen) (Command: x d) 65. Stop Video (Command: k x) Controls the aspect ratio of Multi Screen. Controls Stop Video. Transmission Transmission (x)(d)( )(Set ID)( )(Data1)( )(Data2)(Cr) (k)(x)( )(Set ID)( )(Data)(Cr) Data1 01: Controls the Main input Data 00: The Stop Video feature is on.
  • Page 104 69. [Holiday Setting] (Command: s n, 9b) 3. Deleting a Schedule E0: Deletes all holiday schedules Sets holidays. E1: Deletes the 1st holiday schedule Transmission E2: Deletes the 2nd holiday schedule 1. (s)(n)( )(Set ID)( )(9)(b)( ) E3: Deletes the 3rd holiday schedule (Data1)( )(Data2)( )(Data3)( ) E4: Deletes the 4th holiday schedule (Data4)( )(Data5)( )(Data6)(Cr)
  • Page 105 70. [UPnP] (Command: s n, 9c) 73. [Wi-Fi Lock] (Command: s n, 9f) Sets UPnP.mode. Sets Wi-Fi Lock. Transmission Transmission (s)(n)( )(Set ID)( )(9)(c)( )(Data)(Cr) (s)(n)( )(Set ID)( )(9)(f)( )(Data)(Cr) Data 00: [Off] Data 00: Wi-Fi Unlock 01: [On] 01: Wi-Fi Lock Acknowledgment Acknowledgment (n)( )(Set ID)( )(OK/NG)(9)(c)(Data)(x)
  • Page 106 75. [Backup via Storage] (Command: s n, a1) 76. [Digital Audio Input] (Command: s n, a2) Sets Backup via Storage. Sets Digital Audio Input. Transmission Transmission 1. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Cr) (s)(n)( )(Set ID)( )(a)(2)( )(Data)(Cr) 2. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Data2)(Cr) Data 00: Digital 1.
  • Page 107 79. [Natural Size] (Command: s n, a5) 82. [Audio Out] (Command: s n, aa) Sets the Natural Size feature. Sets Audio Out to Off/Variable/Fixed. Transmission Transmission (s)(n)( )(Set ID)( )(a)(5)( )(Data)(Cr) (s)(n)( )(Set ID)( )(a)(a)( )(Data)(Cr) Data 00-64: Natural Size 0 - 100 Data 00: [Off] 01: [Variable]...
  • Page 108 85. [Apply to all inputs] (Command: s n, 52) 3. 01h to 0ch (Timer Power On days setting) 02: Repeat Daily Apply the video mode and low value of the current input to the same video value of all inputs. 03: Repeat from Monday to Friday 04: Repeat from Monday to Saturday Transmission...
  • Page 109 87. [Time to OFF] Scheduling (Command: f e) 88. LCIN008 Control (Command: s n, b8) Sets Off Timer settings. It controls the LCIN008 device. Transmission Transmission (f)(e)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) (s)(n)( )(Set ID)( )(b)(8)( )(Data1)(Data2)(Cr) Data1 Data 1 00: LCIN008 Power 1.
  • Page 110 91. Change Setid (Command: j x) 94. [UHD Deep Color] (Command: s n, af) Changes and checks Setid. It sets the UHD Deep Color mode for each input. 1. When it is a general LED model Transmission Transmission (s)(n)( )(Set ID)( )(a)(f)( )(Data1)( )(Data2)(Cr) (j)(x)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 70: DVI-D Data1 Data2 : 00 01 ~ 03 e8 (1~1000)

  • Page 111: Frame Control] S N, B7

    96. [Input Manager] (Command: s n, b1) 99. [Scan Inversion] (Command: s n, 87) It sets labels by input. It controls the on/off status of Scan Inversion. Transmission Transmission (s)(n)( )(Set ID)( )(b)(1)( )(Data1)( )(Data2)(Cr) (s)(n)( )(Set ID)( )(8)(7)( )(Data)(Cr) Data1 90: HDMI1 Data 00: Off...

  • Page 112: Read Brightness Value M U

    102. Read Brightness Value (Command: m u) 105. [HDR Picture Mode] (Command: s n, c4) Checks the brightness value. Selects a HDR Picture Mode. Transmission Transmission (m)(u)( )(Set ID)( )(FF)(Cr) (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) Data 00: Mall/QSR 01: General Acknowledgment 02: Gov./Corp.

  • Page 113: Usb2 To Hdbaset] S N, C3

    108. [USB2 to HDBaseT] (Command: s n, c3) 111. [Color Calibration] (Command: s n, d6) Sets USB2 to HDBaseT. Selects Colour Calibration. Transmission Transmission (s)(n)( )(Set ID)( )(c)(3)( )(Data)(Cr) (s)(n)( )(Set ID)( )(d)(6)( )(Data)(Cr) Data 00: [Off] Data 00: Off 01: [On] 01: On Acknowledgment...

  • Page 114: Automatic Adjustment J U

    113. Automatic adjustment (Command: j u) 116. Horizontal Size (Command: f s) Automatically adjusts image location and shake. (Only be Adjust the screen horizontal Size. (Only be executed in RGB-PC executed in RGB-PC input mode.) input mode.) * However, the operating range varies depending on the RGB Transmission input resolution.

  • Page 115: [Waveform] On/Off N, E8

    119. [Vectorscope] On/Off (Command: s n, e7) 122. False Color – Zebra (Command: s n, ea) Adjusts the Vectorscope On/Off. Sets the False Color and Zebra Pattern. Transmission Transmission (s)(n)( )(Set ID)( )(e)(7)( )(Data)(Cr) (s)(n)( )(Set ID)( )(e)(a)( )(Data)(Cr) Data 00: Off Data 00~64: Zebra pattern 0~100...
  • Page 116 125. HDR EOTF (Command: s n, ed) Sets the HDR EOTF. Transmission (s)(n)( )(Set ID)( )(e)(d)( )(Data)(Cr) Data 00: Auto 01: PQ100 02: PQ200 03: PQ300 04: PQ400 05: PQ500 06: PQ600 07: PQ700 08: PQ800 09: PQ900 0A: PQ1000 0B: PQ2000 0C: PQ4000 0D: PQ10000...

  • Page 117: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
  • Page 118 Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (Navigation Buttons) Scrolls through menus or options. Selects menus or options and confirms your input. (BACK) Allows you to move back one step in the user interaction function.

  • Page 119: Making Connections

    System Controller LED Screen LSAA012-MX*, LSAA009-MX*, LSAA012-NX*, LSAA009-NX*, LSAA012-MK, LSAA012-QK, LSAA012-NK, LSAA012-UK, LSAB012-M*, LSAB012-N*, LSAB009-N13, LSAB009-M13, LSAA012-UX*, LSAA012-QX*, LSAA009-UX*, LSAA009-QX*, CSAA-012X, CSAA-012K, CSAA-009X, LSAB009-U13, LSAB009-Q13, CSAB-0121, CSAA-012X3, CSAA-009X2, LSAB009-U2, LSAB009-Q2, LSAB009-N2, LSAB009-M2, CSAB-00913, CSAB-0092, CSAA-012X5, LSAB009-M14, LSAB009-Q14, LSAB009-N14, LSAB009-U14, CSAB-00914, CSAB-01212, CSAB-00922,...
  • Page 120 LED Screen LAN Cable (*Not provided) System Controller System Controller LED Screen CSAB-009X LSAB009-M1*, LSAB009-N1*, LSAB009-U1*, LSAB009-Q1* CAUTION • Check the direction so that the LAN cable is not damaged. • Inserting the LAN cable with excessive force may damage the contact point. •...

  • Page 121: Connecting To Pc

    CSAA-012X, LSAA012-MX*, LSAA012-QX*, LSAA012-NX*, LSAA012-UX*, CSAA-012X3, CSAA-012X5 LSAA012-SX*, LSAA012-TX* LSAA012-MK, LSAA012-QK, LSAA012-NK, LSAA012-UK, CSAA-012K LSAA012-SK, LSAA012-TK LSAA009-MX*, LSAA009-QX*, LSAA009-NX*, LSAA009-UX*, CSAA-009X, CSAA-009X2 LSAA009-SX*, LSAA009-TX* LSAB009-M1*, LSAB009-Q1*, LSAB009-N1*, LSAB009-U1*, CSAB-009X LSAB009-S1*, LSAB009-T1* LSAB012-M*, LSAB012-Q*, LSAB012-N*, LSAB012-U*, CSAB-0121 LSAB012-S*, LSAB012-T* LSAB009-M13, LSAB009-Q13, LSAB009-N13, LSAB009-U13,...

  • Page 122: Connecting To External Devices

    Connecting to External Devices Connect a HD receiver, DVD, or VCR player to the product and select an appropriate input mode. For the best picture quality, use a HDMI cable to connect the product to external devices. NOTE • For the best image quality using a HDMI connection is recommended. •...

  • Page 123: Connecting Multiple Monitors

    Connecting Multiple Monitors To use multiple products, first connect an external device to the product, connect one end of the supported signal input cable to the connector of the product, and then connect the other end to the connector of the product you wish to connect to.

  • Page 124: Connect A Usb Device

    CONNECT A USB DEVICE Connect a USB storage device, such as a USB flash memory to the display device to use multimedia features. CAUTION • Do not turn the Device off or remove the USB storage device when the multimedia screen is activated. This may cause the loss of a file or damage to a USB storage device.
  • Page 125 Tips for Using USB Devices • Only USB storage devices are recognised. • A USB storage device using an automatic recognition program may not be recognised. • A USB storage device which uses its own driver may not be recognised. •...

  • Page 126: Troubleshooting

    TROUBLESHOOTING No image is displayed. • Is the power cord connected to the product? - Check if the power cord is correctly plugged into the power outlet. The ‘Unknown Product’ message appears when the product is connected. • Did you install the driver? - Check if the function is supported by referring to the graphics card user manual.
  • Page 127 The display colour is abnormal. • Screen has poor colour resolution (16 colours). - Set the colour depth to more than 24 bits (true colour). To do this, select (Control Panel) (Display) (Setting) (Colour Palette) on Windows. (May differ depending on your operating system (OS).) •...

  • Page 128: Product Specifications

    PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. symbol means alternating current, and the symbol means direct current. HDMI/DisplayPort: 3840 x 2160 @ 60 Hz Max Resolution - This may not be supported on some OS or graphics card types.
  • Page 129 Wireless module(LGSBWAC72) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range (MHz) Output power (Max.) (dBm) 2400 to 2483.5 5150 to 5725 16.5 5725 to 5850 (Not for EU) 11.5 • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
  • Page 130 (Unit: mm)
  • Page 131 HDMI 1,2,3/DisplayPort (PC) Support Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080 67.5 3840 x 2160 67.5...
  • Page 132 NOTE • Horizontal Frequency: The horizontal interval is the time taken to display one horizontal line. When one horizontal line is divided by the horizontal interval, the number of horizontal lines displayed every second is the horizontal frequency. The unit is kHz. •...

  • Page 133: Licenses

    DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks ® by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
  • Page 134 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL Temporary noise is normal when powering ON or OFF this device. SERIAL NO.

This manual is also suitable for:

Csaa-009x2Csaa-012xCsaa-012x3Csaa-012x5Csaa-012kCsab-00913 ... Show all

Table of Contents