Creating Data For The Roll Feeder; Activating The Roll Feeder Function - Brother ScanNCut DX Manual

Creating Data for the Roll Feeder

Create data for the roll feeder with CanvasWorkspace (Windows/Mac).
CanvasWorkspace (Windows/Mac) (ver. 2.0.0 or later) must be downloaded and installed on your computer.
●
(http://s.brother/cuoad/)
In order to use CanvasWorkspace, a CanvasWorkspace login ID is required.
●
If you do not have a free account, click [Create New Account] in the screen that appears after installation, and then follow the on-
screen instructions to create an account.
Data cannot be created and edited in CanvasWorkspace (Web).
●

Activating the Roll Feeder Function

a
Start up CanvasWorkspace on a computer.
b
In CanvasWorkspace, select [Account Settings...] from the
[Help] menu.
c
Click [Premium Function Activation].
d
Type in the activation code on the included activation
card, and then click [Activate].
• A connection to the Internet is required for activation.
• The uppercase letters "O" and "I" are not used in the activation
code.
• The activation code is valid for only one CanvasWorkspace
login ID. The same activation code cannot be used again.
e
When the activation confirmation message appears,
confirm the information, and then click [Activate] if it is
correct.
f
Click [OK] to finish the activation.
3