Creating Data For The Roll Feeder; Activating The Roll Feeder Function - Brother ScanNCut DX Manual

Roll feeder
Hide thumbs

Advertisement

Table of Contents

Creating Data for the Roll Feeder

Create data for the roll feeder with CanvasWorkspace (PC Version).
CanvasWorkspace (PC Version) (ver. 2.0.0 or later) must be downloaded and installed on your computer.
(http://s.brother/cuoad/)
In order to use CanvasWorkspace, a CanvasWorkspace login ID is required.
If you do not have a free account, click [Create New Account] in the screen that appears after installation, and then follow the on-
screen instructions to create an account.
Data cannot be created and edited in CanvasWorkspace (Internet Version).

Activating the Roll Feeder Function

a
Start up CanvasWorkspace on a computer.
b
In CanvasWorkspace, select [Account Settings...] from the
[Help] menu.
c
Click [Premium Function Activation].
d
Type in the activation code on the included activation
code card, and then click [Activate].
• A connection to the Internet is required for activation.
• The uppercase letters "O" and "I" are not used in the activation
code.
• The activation code is valid for only one CanvasWorkspace
login ID. The same activation code cannot be used again.
e
When the activation confirmation message appears,
confirm the information, and then click [Activate] if it is
correct.
f
Click [OK] to finish the activation.
3

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Brother ScanNCut DX

Table of Contents