Keyboard Assembly; Removing The Keyboard Assembly - Dell P137G Service Manual

Steps
1. Adhere the coin-cell battery to the slot on the palm-rest assembly.
2. Connect the coin-cell battery cable to the connector.
Next steps
1. Install the LED board.
2. Install the power-button
3. Install the SIM-card slot filler
4. Install the system board.
5. Install the assembly inner
6. Install the heat sink -
7. Install the battery.
8. Install the WWAN card.
9. Install the WLAN card.
10. Install the 2280 solid-state drive
11. Install the memory module.
12. Install the base cover.
13. Install the microSD card.
14. Install the SIM card.
15. Exit Service Mode.
16. Follow the procedure in

Keyboard assembly

Removing the keyboard assembly

Prerequisites
1. Follow the procedure in
2. Enter Service Mode.
3. Remove the SIM card.
62 Removing and installing components
board.
for models shipped without a WWAN card.
frame.
UMA or discrete based on the system configuration.
or 2230 solid-state
After working inside your
Before working inside your
drive.
computer.
computer.