Steps
1. Align the screw holes on the heat sink and fan assembly with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the six (M2x3) and two (M2x5) screws that secure the heat sink
and fan assembly to the system board.
Next steps
1. Install the
microSD
card.
2. Install the
SIM
card.
3. Install the
base
cover.
4. Exit
Service
Mode.
5. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
microSD
4. Remove the
SIM
card.
5. Remove the battery.
About this task
The following images indicate the location of the speakers and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
45