Usb Type-C Bracket; Removing The Usb Type-C Bracket - Dell P137G Service Manual

Steps
1. Using the alignment posts and rubber grommets, place the speakers on the slots of the palm-rest and keyboard assembly.
2. Connect the speaker cable to the system board.
3. Route the speaker cable through the bottom-left corner of the system and ensure that the speaker cables are routed firmly
into the routing channels on the inner frame.
Next steps
1. Install the battery.
2. Install the microSD card.
3. Install the SIM card.
4. Install the base cover.
5. Follow the procedure in

USB type-C bracket

Removing the USB type-C bracket

Prerequisites
1. Follow the procedure in
2. Enter Service Mode.
3. Remove the SIM card.
4. Remove the microSD
5. Remove the base cover.
6. Remove the heat sink -
About this task
The following images indicate the location of the USB type-C bracket and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
card.
UMA or discrete based on the system configuration.
computer.
computer.
Removing and installing components 47