Maintenance And Cleaning; Fluff Filter; Sensor (Models Equipped With A Sensor) - Saivod STE 6 Manual

5

Maintenance and cleaning

Fluff filter

Lint and fibres released from the laundry to the
air during the drying cycle are collected in the
"Fluff Filter".
C
Such fibre and lint are generally formed
during wearing and washing.
C
Always clean the filter after each Drying
process.
C
You can clean the filter and filter area
by vacuum cleaner.
For Filter cleaning;
1 Open the cover
2 Remove the fluff filter by pulling it up and
open the filter.
3 Clean lint, fibre, and the fluff by hand or with a
soft piece of cloth.
4 Close the filter and place it back into its seat.
Sensor (models equipped with a
sensor)
There are humidity sensors
in your machine that detect
whether the laundry is dry or not.
For sensor cleaning;
1 Open the cover of your
machine.
2 Allow the machine to cool off if drying
has been carried out.
3 Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents or
substances alike when cleaning as these might
cause fire and explosion!
11 - EN