Wireless Card; Removing The Wireless Card - Dell P116G Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
2. Slide the solid-state drive into the solid-state slot on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive to the system board.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Wireless card

Removing the wireless card

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 23