Table of Contents
Advertisement
196
4-2. Driving procedures
NOTICE
When the parking brake cannot be
■
released due to a malfunction
Driving the vehicle with the parking
brake set will lead to brake components
overheating, which may affect braking
performance and increase brake wear.
Have the vehicle inspected by your
Lexus dealer immediately if this occurs.
Brake Hold
The brake hold system keeps the
brake applied when the shift lever is
in D, S or N with the system on and
the brake pedal has been
depressed to stop the vehicle. The
system releases the brake when the
accelerator pedal is depressed with
the shift lever in D or S to allow
smooth start off.
Enabling the system
Turns the brake hold system on
The brake hold standby indicator (green)
comes on. While the system is holding
A
the brake, the brake hold operated indica-
tor (yellow)
comes on.
B
■
Brake hold system operating conditions
The brake hold system cannot be turned on
in the following conditions:
●
The driver's door is not closed.
●
The driver is not wearing the seat belt.
If any of the conditions above are detected
when the brake hold system is enabled, the
system will turn off and the brake hold
standby indicator light will go off. In addi-
tion, if any of the conditions are detected
while the system is holding the brake, a
warning buzzer will sound and a message
will be shown on the multi-information dis-
Advertisement
Table of Contents
