Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hoymiles Hoyhome HV Series
Summary of Contents for Hoymiles Hoyhome HV Series
- Page 1 Installation&User Manual Hoyhome HV series Version 1.0...
-
Page 2: Table Of Contents
Contents 1. Safety precaution ..........................2 1.1 Storage and installation environment ................... 2 1.2 Battery safety guidelines ......................2 1.3 Warning signs and stickers ......................2 1.4 Emergency handling ........................3 2. Product description ..........................4 2.1 Product introduction ........................4 2.2 Appearance and packing list ...................... -
Page 3: Safety Precaution
1. Safety precaution Please read the manual carefully and operate in accordance with the safety precautions. Please refer to local safety regulations on items not covered in this manual. Electrical installation, maintenance must be performed by professional / qualified personnel. 1.1 Storage and installation environment ... -
Page 4: Emergency Handling
Fragile Do not get wet 1.4 Emergency handling Wear personal protective equipment (PPE) such as goggle, face mask, insulated gloves and boots. Evaluate the situation before taking remedy action. When it is safe to do so, disconnect external AC or DC power connection. -
Page 5: Product Description
2. Product description Hoyhome HV series is a modular energy storage system, compatible with mainstream inverter suppliers. This document mainly provides product introduction, installation, commissioning, maintenance, troubleshooting, packaging and transportation information. 2.1 Product introduction Residential energy storage system with lithium iron phosphate (LFP) technology ... -
Page 6: Appearance And Packing List
2.2 Appearance and packing list Overall appearance Power/communication receiver... - Page 7 Control box Control box packing list Certificate Control box User manual Bracket 1 Screw(M4*12) 1PCS 1PCS 1PCS 1PCS 2PCS OT terminal CT75A-1Z-28 CT75A-1T-28 ICX10-F12A1T 1PCS 1PCS 1PCS 2PCS 2.PACK A Packing list PACK A Bracket 1 Bracket 2 Screw(M4*12) 1PCS 2PCS 1PCS 4PCS...
-
Page 8: Installation Guide
3. Installation guide 3.1 Environmental requirements Ambient temperature: 0℃~+50℃ (recommended: 10℃～35℃ or 50℉~95℉). Ambient humidity: 10-95%. Altitude <= 2000m. For outdoor installation Avoid direct sunlight Avoid rain and snow Avoid location susceptible to flooding Install under shed if possible For indoor installation Feet clearance from doors, windows, driveway or other batteries Keep away from heating device. -
Page 9: Installation Physical Requirements
3.2 Installation physical requirements Correct quantity for installation Installation clearance... -
Page 10: Installation
3.3 Installation Installation tool preparation Detector Torque screwdriver Steel belt Spirit level Crimping pliers Network cable pliers Wire stripper Personal safety equipment Safety gloves Goggle Dust cover Safety shoes 3.4 Installation steps 1. Unboxing Take out and place the battery and check the components. - Page 11 2. Bracket Installation Use a cross screwdriver (torque screwdriver 5 N.M) to secure the control box and bracket 1 on the PACK.
- Page 12 3.PACK B installation 3.1 If installing bracket, use a detector to detect whether there is cable or water tube behind the wall 3.2 The pack should be placed on a level ground (0°~3°), parallel to the wall and keep a distance of at least 20mm.
- Page 13 remaining battery modules are stacked layer by layer as shown in the figure) 6.Installation completes (up to 6 battery modules)
-
Page 14: Electrical Connections
4. Electrical connections NOTE: Before connecting cables, make sure all systems are powered off. 4.1 Grounding instructions Harness name Cable mark （485/CAN）PCS communication COM1 COM1 Parallel communication COM2 （D+）Output positive terminal (D+) （D-）Output negative terminal (D-) DC Switch ON OFF WIFI WIFI Ground connection... -
Page 15: Grounding Instructions And Preparation
COM2 Color Port Function Orange-white RS485A RS485B Orange CAN-G Green- white Blue CAN-H CAN-L Blue- white Green CAN-1G CAN-1H Brown-white CAN-1L Brown 4.2 Grounding instructions and preparation Ensure that it is firmly connected to the ground, and the grounding resistance is less than 4 ohms. Cable specification 10AWG, yellow-green cable Stripping size... -
Page 16: Cable Making
4.4 Cable making Step1 Strip the communication cable stripper with Ethernet and guide the corresponding signal cable output. Pass the communication cable through ICX10-F12A1T, insert the RJ45 plug in the correct order, and crimp it with a crimper. 4.5 Cable connection 4.5.1. - Page 17 Parallel device cable connection Parallel system communication wiring diagram...
-
Page 18: System Debugging
5. System debugging All cables must be connected correctly. 5.1 System power-on 1. Turn off the battery switch on the inverter（if the inverter has a separate battery switch）. 2. Open control module DC Switch 5.2 System outage Turn off the battery switch on the inverter side (if the inverter has a separate battery switch) 2. -
Page 19: Maintenance Manual/General Troubleshooting
6. Maintenance manual/general troubleshooting 6.1 Routine maintenance The battery needs to be recharged every 6 months if not working From the date of shipment from the manufacturer, the battery needs to be maintained at a maximum interval of 6 months; the requirements for the recharge interval after the battery is empty are as follows: Ambient temperature (45,50]℃, should be recharged within 7 days;... - Page 20 of time before it is allowed to discharge. battery over temperature Stand at room temperature for more than 3 hours After the system is powered on, Display failure Please contact the supplier to repair the display cannot be lit or the or replace the control module displayed content is abnormal The display cannot wake up...
-
Page 21: Warehouse Storage Guidelines
7. Warehouse storage guidelines 7.1 Packaging Guidelines As this product contains lithium-ion batteries, it must be packed as required when shipping by sea or air. The packaging requirements for hazardous packaging of battery products are as follows: a. Packaging manufacturers with dangerous goods packaging qualifications are responsible for providing product packaging, and the packaging manufacturers have records in the local commodity inspection bureau;... -
Page 22: Dispose Of Used Batteries
8. Dispose of used batteries Disposal of the system must comply with applicable local regulations for the disposal of electronic waste and used batteries. • Do not dispose of the battery system with your household waste. • Avoid exposing the battery to high temperatures or direct sunlight. •...
Need help?
Do you have a question about the Hoyhome HV Series and is the answer not in the manual?
Questions and answers