Selecting A Signal Source; Using The Lock Function; Setting The Timer - TCL L40E3020F Operation Manual

Auto volume control : select On mode to reduce the
annoying blasts in volume during commercial breaks
and also amplifies softer sounds in program material.
Eliminates the need to constantly adjust the volume.
Note: the options offered depend on the programme
you are watching.

Selecting a Signal Source

Display the main menu by pressing Menu and
select Source, then press OK to confirm.
1.Press the up and down direction button to select
your desired source.
Note: The available source might differ
depending on the model.
2. Press the OK button to confirm the selection.
Note: You can press the Source button on the
remote control to switch the source.

Using the Lock Function

This menu can control the special function for TV
channels.
Note: you must enter your personal code before
Entering the Lock menu.
Display the main menu by pressing Menu and select
Lock, then press OK to confirm. Then press the number
button to enter the password to enter the Lock menu.
The factory default code is 1234. And the super
password is 0423. If you forget your code, enter it to
override any existing codes.
Channel lock
Parental rating
Input lock
Front panel lock
Installation lock
Max volume
Enter
OK
Change password
Select
Clean all
Back
Menu
Exit
Exit
The Lock options are as below:
Channel Lock: this option allows you to lock a certain
TV channel. Highlight Channel lock, press the OK or
right direction button to display Channel lock menu.
Use the up or down direction button to select a certain
TV channel you want to lock, then press the OK button
to lock. To unlock, use the same operation.
Parental rating: this option allows you to set a rating to
a program. Highlight Parental rating, press the OK or
right direction button to display Parental rating menu.
Then use the left or right direction button to adjust.
Lock
. . . . . .
. . . . . .
. . . . . .
Off
Off
100
. . . . . .
. . . . . .
Advanced Functions
Input lock: this option allows you to lock a certain
external source you want to lock. Press the OK or right
direction button to display Input lock menu, then press
the up or down direction button to select a certain
external source you want to Lock, and press the OK
button to lock. To unlock, use the same operation.
Note: when the current input is locked, you can press
OK and enter the password to enter.
Front panel lock: this option allows you to lock the set's
buttons, press the left or right direction button to select
On to lock the set's buttons.
Installation lock: press the left or right direction button
to select On to prevent access to the Installation menu to
prevent any channels from being set up without your
consent.
Max volume: press the left or right direction button to set
the max volume when watching programme.
Change password: this option allows you to change the
password. Press the OK or right direction button to enter,
then press the number button to enter the new password
twice.
Clean all: this option allows you to unlock all locked
channels. Press OK to enter, use the left or right
direction button to select OK, press OK to confirm.

Setting the Timer

The Timer menu allows you to set the time zone on your
TV set, to programme an automatic turn-off or wake-up
timer and to view the calendar.
Display main menu by pressing Menu. Select Timer and
press OK to confirm. The Timer options are as below:
Time zone
Country region
Clock
Sleep timer
Select
Back
Menu
Exit
Exit
Time zone: use the left or right direction button to select
the local time zone.
Country region: use the left or right direction button to
select.
Clock: press the OK or right direction button to display
its options:
11
Timer
As broadcaster
NSW/ACT
. . . . . .
Off