Page 1
HD26232 DROP THROUGH ANCHOR 5,000-lbf / 22kN Model # HD26232 Made in the USA IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS EQUIPMENT.
Page 2
PURPOSE The HD26232 is an anchorage connector designed to function as an interface between the anchorage and a fall protection, work positioning, rope access, or rescue system for the purpose of coupling the system to the anchorage. Any references to “anchorage connector”...
Page 3
3/16” Plate Swivel Ring Installation: 1. The HD26232 drop through anchor can only be used on a horizontal surface that is above the users location. 2. Locate or create a through hole in concrete, steel or metal grating capable of withstanding a 5,000-lbf.
Page 4
PMI products. Because of the high risks involved in high angle rope work such as, but not limited to, rescue, rope access, caving, rappelling, rock climbing and mountaineering, no further warranties exist or are implied by PMI.
Need help?
Do you have a question about the HD26232 and is the answer not in the manual?
Questions and answers