Download Print this page

PMI SG51029 Manufacturer's Instructions

Anchor sling

Advertisement

Quick Links

For more information about this or other
PMI products, please contact us at:
PIGEON MOUNTAIN INDUSTRIES
PO Box 803
LaFayette, GA 30728, USA
706-764-1437
1-800-282-ROPE (7673)
custserv@pmirope.com
PMIROPE.COM
WARNING
• YOU COULD BE KILLED OR SERIOUSLY INJURED IF YOU DO NOT READ AND
UNDERSTAND THIS BOOKLET BEFORE USING PRODUCT.
• SPECIAL TRAINING AND KNOWLEDGE ARE REQUIRED TO USE THIS PRODUCT.
• YOU MUST THOROUGHLY READ AND UNDERSTAND ALL MANUFACTURER'S
INSTRUCTIONS BEFORE USE.
• USE AND INSPECT THIS PRODUCT ONLY IN ACCORDANCE WITH THE
MANUFACTURER'S INSTRUCTIONS.
• YOU CAN CONTACT THE MANUFACTURER AT 706-764-1437 FOR IMPORTANT
SAFETY INFORMATION.
PMI LIMITED WARRANTY
PMI products are warranted to the original retail purchaser to be free from defect
in material and workmanship for a period of one year. PMI will repair or replace
the item without charge provided inspection at our factory discloses no misuse or
alteration, which, in our judgment, has affected the condition or functioning of the
product. All implied warranties imposed by law in connection with the sale of PMI
products are also limited in duration to a period of one year. PMI expressly excludes
and shall not be liable for any consequential damages arising out of any breach of
the express or implied warranties on sales of PMI products. Because of the high risks
involved in high angle rope work such as, but not limited to, rescue, rope access,
caving, rappelling, rock climbing and mountaineering, no further warranties exist
or are implied by PMI. Regulations issued under the Magnuson-Moss Warranty Act
require us to include the following statement: some states do not allow limitations
on how long an implied warranty lasts nor the excluding or limitation of incidental or
consequential damages, so the above limitations may not apply to you.
RM00395
V5-0118
PRODUCT DESCRIPTION
Any person rigging life safety rated anchors will want to have many of these lightweight, compact,
high strength and incredibly versatile PMI Anchor Slings always on hand. Easy to set up and very
reliable, these slings are great to build anchors in a end to end, basket or choker configuration. Use
these configurations to wrap it around an appropriate full strength life safety anchor, such as a steel
I-beam, and attach your rope or fall arrest system in a manner that minimizes abrasion and is secure to
the anchor. It comes in multiple lengths ideal for a variety of rigging environments, so you may want
to have different sizes for ultimate efficiency. The PMI Anchor Sling is certified to NFPA and ANSI
standards.
KEY FEATURES:
1 3/4" wide nylon webbing • 3 different lengths • Compact • Lightweight • Thick flat webbing
for extra protection over sharp edges • Multiple configurations for adaptability • Fast setup and
connection capability with large D-Ring attachment points • High strength • Certified to NFPA and
ANSI standards
SPECIFICATIONS
PRODUCT
CALCULATED MINIMUM
SKU
NAME
BREAKING STRENGTH (kN)
Basket (U)
PMI®
SG51029
Anchor
SG51030
End-to-End
Sling
SG51031
Choker
SG51029
SG51030
LENGTH: 3 FT (100 CM)
LENGTH: 4 FT (150 CM)
WIDTH: 1.75" (4.4 CM)
WIDTH: 1.75" (4.4 CM)
WEIGHT: 11.0 OZ (311 G)
WEIGHT: 12.0 OZ (354 G)
Materials - Nylon, polyester and steel.
CERTIFICATIONS
atic Rop e
Meets ANSI Z359.18, 2017 Edition, Type A- Anchorage Connector.
MEETS THE MULTIPLE CONFIGURATION STRAP REQUIREMENTS OF NFPA 1983, STANDARD ON
LIFE SAFETY ROPE AND EQUIPMENT FOR EMERGENCY SERVICES, 2017 EDITION.
I
Hudson Classic Professional
®
PMI® ANCHOR SLING IS MADE IN THE USA
's Classic EZ-Bend 16-carrier construction combined with the toughest nylon on the market makes PMI ropes some of the toughest in the world. PMI
®
Additional information regarding multiple configuration straps can be found in NFPA 1500 and NFPA
sic 16-carrier ropes will always beat 32, 40, and 48-carrier designs made with lesser quality nylons hands down in abrasion and real-world durability tests.
1983.
ough all diameters of PMI
Classic rope are 16-carrier sheath design, the denier (thickness) of each diameter's sheath is different. It is carefully designed to
®
This anchorage connector has been tested in compliance with the requirements of ANSI/ASSE
de the maximum abrasion resistance, "grab" the core to minimize sheath slippage, and provide the desired hand for the intended applications.
Z359.7.
Features: NFPA Certified • 16-carrier construction • CI1801 • Third party certified by UL (Underwriters Laboratories) • Torsionally balanced, continuous
ent nylon • Available in many colors • Also available in custom colors and lengths
WARNING
The ANSI Compliance and testing covers only the hardware and does not extend to the anchorage and
substrate to which the anchorage connector is attached.
rs: Available colors for the PMI
®
Hudson Classic Professional. Rope
For Type A and Type T, load-bearing metallic materials used in anchorage connectors shall maintain
s and tracers vary with rope diameter. EZ-Bend ropes have two tracers.
adequate toughness at temperatures between -30 degrees F (-34 degrees C) and +130degrees
Wear ropes have one tracer.
F (+54 degrees C) or be engineered to account for the reduced toughness at low temperatures.
Adequate toughness is defined as no more than a 10% drop in energy absorption between
representative material specimens conditioned at -30 degrees F (-34 degrees C) and +130 degrees F
WHITE/BLACK (WB)
(+54 degrees C) undergoing a recognized impact test. The manufacturer may provide published for
fracture toughness at these temperatures as evidence that adequate toughness is maintained. Metallic
components that have been tested and certified as meeting ANSI/ASSE Z359.12, are deemed to
comply with 3.1.3.2.
ORANGE/WHITE (OW)
WARNINGS
WARNING
RED/BLACK (RB)
ABOUT YOUR PERSONAL SAFETY
• You are responsible for your own safety and decisions while using this product.
• Special training and knowledge are required to use this product. This sling is intended for use by
RED (RD)
those who are trained and experienced in technical rope rigging and rescue applications.
• Before using this product you must thoroughly read and understand these Manufacturer's
Instructions, as well as all warnings, product labels and associated information.
WHITE/ORANGE (WO)
• Activities involving the use of this product are inherently dangerous; you must understand and
accept the risks involved.
BLUE/WHITE (BW)
• Failure to follow these stated warnings may result in serious injury or death.
• Copy these Manufacturer's Instructions after they are separated from the sling and keep as
a permanent record; Keep Manufacturer's Instructions, all product labels and the Equipment
Inspection Log WITH the equipment so that any potential user can refer to them before and after
BLUE (BL)
use if desired and make inspection, use or status entries as needed.
NFPA 1983-2017
TYPE/CLASS
70.9 (15,950 lbf)
Multiple
Configuration
39.2 (8,815 lbf)
Strap – General
Use
29.1 (6,550 lbf)
SG51031
LENGTH: 6 FT (200 CM)
WIDTH: 1.75" (4.4 CM)
WEIGHT: 14.0 OZ (410 G)
MADE IN THE USA
ORANGE/BLACK (OB)
RED/WHITE (RW)
BLUE/BLACK (BB)
OD GREEN (OD)
YELLOW/WHITE (YW)
YELLOW/BLACK (YB)
BLACK (BK)
PMI
ANCHOR SLING
SG51029
Manufacturer's Instructions
PMIROPE.COM
WARNINGS
(continued)
WARNING
• Please contact PMI at 706-764-1437 to answer any additional questions regarding safety and use
of this equipment.
• Only attach equipment to the metal attachment points of these slings.
• Be aware of the hazards created when this product is being used in conjunction with a fall arrest
system.
• Be aware and take precautions to prevent injury while using these slings around moving machinery,
electrical hazards and avoid using on or near elements with high temperatures that can damage the
sling.
• Avoid contact between moving textiles (such as nylon rope or webbing) and stationary textiles.
Friction between textiles can quickly melt through the fixed part.
• Avoid exposure of this product to any liquids, solids, gases, mists, or vapors of any chemical or
other material that can deteriorate the fiber from which it is made. Consult with the manufacturer
ANSI/ASSE
in any case of doubt regarding the safe use and any possibility of damage to the product. If in
Z359.18-2017
doubt of the safety of the product, then retire, cut up the product immediately and discard it in a
manner where it cannot be used again or cannot be put back in service.
Anchorage
• All connectors used with these slings must be closed and locked in a manner that prevents it from
Connector –
opening or coming detached from the lanyard during use.
Type A
• These manufacturer's instructions shall be provided; or immediately available, to authorized
persons.
• Do not use these lanyards for material handling.
• Do not remove or alter any manufacturer labels for this product.
• Use, storage, care, maintenance, inspection, and retirement of this product should be done in
accordance with these manufacturer's instructions and in accordance with ANSI/ASSE Z359.2,
Minimum Requirements for a Managed Fall Protection Program. Inspections should only be
conducted by an individual designated by the employer to be competent for all tasks required.
WARNING
PMI is not responsible or liable in any way for damages of any kind, injury or death resulting from
direct or indirect incidents related to the use of its products.
WARNING
The entire life safety anchor system including the anchor points, ropes, webbing, carabiners and other
equipment in the system must be of sufficient strength to safely hold the maximum weight of the
intended transferred load.
WARNING
Check to be sure that this product is compatible with the other components of your system before
use.
WARNING
Avoid possible abrasion that can happen when slings come into contact with hard, sharp or rough
surfaces.
WARNING
DO NOT attempt any repairs, alterations, relocations or additions to the the sling in any way. Any of
these actions to this product will immediately void the warranty and can compromise the safety of
this product leading to possible severe injury or death. Contact PMI with any questions.
WARNING
If the user is unable to determine whether the anchorage meets the manufacturer's specifications and
instructions, then the anchorage connector shall only be attached to anchorages that:
a)
can withstand 5,000 pounds (22.2 kN) without failure, except that lower strengths are acceptable
when permitted by applicable legislation; or
b)
are certified by a professional engineer as having the required strength for fall arrest or travel
restraint, as applicable; or
c)
the manufacturer may provide specifications of allowable materials including the minimum shapes,
sizes and geometry of structural elements to which the anchorage connector may be fastened. A
qualified person shall approve these specifications.
WARNING
Only one fall protection system or positioning system may be attached to an individual connection
point.
WARNING
Remove any surface contamination such as concrete, stucco, roofing material, etc., that
could accelerate cutting or abrading of attached components.
®
SG51030
SG51031
T
1-800-282-ROPE
®
74F9
ANCHORAGE
Hardware
CONNECTORS

Advertisement

loading
Need help?

Need help?

Do you have a question about the SG51029 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PMI SG51029

  • Page 1 PMI® ANCHOR SLING IS MADE IN THE USA MADE IN THE USA WARNING ’s Classic EZ-Bend 16-carrier construction combined with the toughest nylon on the market makes PMI ropes some of the toughest in the world. PMI ® ® The entire life safety anchor system including the anchor points, ropes, webbing, carabiners and other Additional information regarding multiple configuration straps can be found in NFPA 1500 and NFPA sic 16-carrier ropes will always beat 32, 40, and 48-carrier designs made with lesser quality nylons hands down in abrasion and real-world durability tests.
  • Page 2 PMI product you can contact PMI at (706) 764-1437. Regardless of history and use, a PMI® Anchor Sling should be retired if it is greater than 10 years from the date of manufacture. The actual service life may be much less than 10 years and should be based largely on the results of frequent inspection and use history.

This manual is also suitable for:

Sg51030Sg51031