Rinnai HD210e Operation & Installation Manual page 6

WARNINGS & IMPORTANT INFORMATION
The range of Rinnai gas continuous flow water heaters referred to in this manual are incompatible
with solar water heating systems. A dedicated range of solar compatible gas continuous flow
water heaters is available from Rinnai.
IMPORTANT
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Always check water temperature carefully before use.
Refer to the "WARNING ABOUT HOT WATER" on
page 4 for important safety information.
DO NOT touch the unit cover or the flue outlet.
DO NOT insert objects into the flue outlet.
DO NOT spray water directly into the flue outlet.
Keep, trees, shrubs, etc. well clear of the flue outlet.
On colder days steam may discharged from the flue
outlet. This condition is normal for high efficiency
appliances and does not indicate a fault.
Drain (Pressure Relief Valve)
Hot Water Outlet
If freezing conditions are expected, turn off water and
gas, and drain all water from the appliance. If power
and the automatic frost protection are connected,
freezing will be prevented. (Anti-frost protection is
fitted as standard equipment on all hot water units).
Rinnai
HOT!
Cold Water Inlet
Filter
Gas Connection
Condensate Outlet
At low water flows, the hot water unit may extinguish
without warning. Opening the tap further will restart
the heating appliance.
DO NOT Spray aerosols in the vicinity of this appliance
while it is in operation.
DO NOT use or store flammable materials in or near
this appliance.
DO NOT place articles on or against this appliance.
DO NOT modify this appliance.
DO NOT store pool chemicals near this appliance.
43°C
The delivered water temperature is controlled
automatically. The flow may vary depending on the
delivery temperature selected and the ambient water
temperature.
6
OFF!
55°C
HW_HD_CF OIM