Dantherm MASTER CF 75 User And Maintenance Manual page 23

►►17.TROUBLESHOOTING
FAULTS
The heater No voltage
doesn't work
Incorrect connection of
the room thermostat
The heater Tripped room
doesn't work in thermostat (optional
heating mode item)
Incorrect connection of
the room thermostat
Room thermostat
socket cap not
inserted properly
No gas supply
Blocked heater
Defective electronic
equipment
Incorrect heater setting 1.Authorised technical support centre
The flame Defective electronic
does not stay equipment
on
The flame Tripped room
turns off thermostat (optional
during normal item)
operation
No gas supply
No voltage
The heater overheats
CAUSES
1.Check the mains system
2.Check the electrical connections
3.Authorised technical support centre
1.Connect the room thermostat correctly
1.Set the room thermostat at a temperature
lower than the room thermostat
1.Connect the room thermostat correctly
1.Insert the cap properly in the socket
1.Check the gas system
2.Authorised technical support centre
1.Reset the heater by setting the power
button to position "0"
2.Authorised technical support centre
1.Authorised technical support centre
1.Authorised technical support centre
1.Set the room thermostat at a temperature
lower than the room thermostat
1.Check the gas system
2.Authorised technical support centre
1.Check the mains system
2.Check the electrical connections
3.Authorised technical support centre
1.Clean the air inlet (lower side) and reset
the manual security thermostat (Fig. 27)
2.The heater's limit operating temperatures
are too high
3.The air intake temperatures are too high
4.Extensive exposure to sun light
5.Authorised technical support centre
SOLUTIONS
en
it
de
es
fr
nl
pt
da
fi
no
sv
pl
ru
cs
hu
sl
tr
hr
lt
lv
et
ro
sk
bg
uk
bs
el
zh