Table of Contents
Advertisement
en
Water softening system/Special salt
Setting
set from •:‹‹ to •:‹ˆ.
The amount of salt dispensed can be
•:‹‹.
Salt is not required at the set value
1. Find out about the hardness value of
your tap water. Your water utility
company will help you with this.
2. Set value can be found in the water
hardness table.
3. Close the door.
4. Switch on ON/OFF switch (.
5. Hold down programme button #
and press START button P until
•:‹.... is indicated on the digital
display.
6. Release both buttons.
The LED for button # flashes and
the digital display )" displays the
factory setting •:‹....
To change the setting:
1. Press programme button 3.
Each time the button is pressed, the
when the value of •:‹ˆ has been
set value increases by one level;
to •:‹‹ (off).
reached, the display jumps back
2. Press START button P.
The chosen setting has now been
stored.
12
Water hardness table
Advertisement
Table of Contents
