5.3.2
Setting up your display
LucidLogix
Virtu MVP™ solution comes with two distinct modes that allows you to enjoy
®
better graphics either from your built-in video output (i-Mode) or from a discrete graphics
card (d-Mode).
i-Mode
To use LucidLogix® Virtu MVP™ in i-Mode, the display must be connected to the onboard
video output.
Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support.
d-Mode
To use LucidLogix
Virtu MVP™ in d-Mode, the display must be connected to the installed
®
graphics card.
•
Ensure to set the Primary Display to PCIE or PCIE/PCI in BIOS to enable
d-Mode support.
•
d-Mode is recommended for an enhanced 3D gaming performance.
i-Mode (VGA output
from motherboard)
The motherboard's IO ports and discrete graphic card is for reference only and may vary in
different models.
ASUS P8Z77-V LK
d-Mode (VGA output from
discrete graphics card)
5-9