Changing The Side On Which The Door Opens - ETNA KCV282N Series Instructions For Use Manual

INSTALLATION AND CONNECTION

Changing the side on which the door opens

Tools Left hinge cover
Switch off the appliance and disconnect it from the mains.
1. Remove all door compartments and close the door.
2. Remove the cover plates and the screws.
3. Remove the upper hinge, flip the hinge and set it aside for a while.
4. Carefully lift the top door from the middle hinge and place it on a padded surface to prevent
scratching.
5. Unscrew part 'S' and attach it to the other side with the screws.
EN 15