13. Check and adjust the track tension; refer to Checking
and Adjusting the Track Tension (page 31).
14. Check and adjust the digging chain tension; refer to
Checking and Adjusting the Digging Chain and Boom
(page 38).
15. Check and tighten all bolts, nuts, and screws. Repair or
replace any part that is damaged.
16. Paint all scratched or bare metal surfaces. Paint is
available from your Authorized Service Dealer.
17. Store the machine in a clean, dry garage or storage area.
Remove the key from the ignition switch and keep it in
a memorable place.
18. Cover the machine to protect it and keep it clean.
41