Humidclean Cleaning Support - Siemens HX5P00D20N User Manual And Installation Instructions

Free standing cooker
Table of Contents

Advertisement

en humidClean cleaning support
¡ Do not use a glass ceramic cleaner.
¡ Do not remove the cooking zone switch.
1.
Clean the cooking zone switch using hot soapy wa-
ter and a soft cloth.
12  humidClean cleaning support
The cleaning aid is a fast alternative for occasionally
cleaning the cooking compartment. The cleaning aid
evaporates soapy water and therefore softens dirt. This
means that dirt can be removed more easily.
12.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
when the cooking compartment is hot.
Requirement: The cooking compartment must be
cooled down completely.
1.
Remove the accessories from the cooking compart-
ment.
2.
Add one drop of detergent to 0.4 l water and pour it
onto the centre of the cooking compartment floor.
Do not use distilled water.
3.
Use the function selector to set the Bottom heat-
ing 
type of heating.
4.
Use the temperature selector to set 80 °C.
5.
Switch the appliance on for four minutes.
13  Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
13.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
Never touch the rails when they are hot.
Allow the appliance to cool down.
Keep children at a safe distance.
1.
Lift the front rail upwards and unhook it.
20
– Wring out the cloth well. The cloth must not be
too wet.
– Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
6.
Switch off the appliance after four minutes and leave
it to cool for approx. 20 minutes.
12.2 Cleaning the cooking compartment
after using it
ATTENTION!
If the cooking compartment remains damp for too long,
this results in corrosion.
After using the cleaning aid, wipe the cooking com-
partment and allow it to dry completely.
Requirement: The cooking compartment has cooled
down.
1.
Open the appliance door and absorb the residual
water with an absorbent sponge cloth.
2.
Clean smooth surfaces in the cooking compartment
with a dish cloth or a soft brush. Remove stubborn
residues with a stainless steel spiral scourer.
3.
Remove limescale deposits using a vinegar-soaked
cloth. Wipe this away with clear water and use a soft
cloth to also rub underneath the door seal dry.
4.
Once the cooking compartment is sufficiently clean:
In order to cool the cooking compartment, leave
the appliance door open in the detent position
for approx. one hour.
2.
Then push the entire rail to the front and remove it.

Advertisement

Table of Contents
loading

Table of Contents