Sharp MX-B201D Start Manual page 2

SPECIFICATIONS
Model MX-B201D
Type Digital Multifunctional System, Desktop
Photoconductive
OPC drum
type
Document glass
Fixed
type
Copy/printing
Dry, electrostatic transfer
system
Originals Sheets, bound documents
Originals size Max. 8-1/2" x 14" (A4)
Max. 8-1/2" x 14" (A4)
Min. 8-1/2" x 5-1/2" (A6)
Image loss: Max. 11/64" (4mm)
(leading and trailing edges)
Copy size Max. 3/16" (4.5mm)
(along other edges in total)
Max. 1/4" (6mm)
(trailing edge of the second copy of two-
sided copying.)
20 copies/min. (8-1/2" x 11" (A4), one-sided at 100%
1
Copying speed*
copy ratio)
Continuous copy Max. 99 copies; subtractive counter
8.0 seconds (When user program 24 is set to OFF)
2
First-copy time* 10.7 seconds (When user program 24 is set to ON)
(paper: A4, exposure mode: AUTO, copy ratio: 100%)
3
Warm-up time* -
Document glass:
Variable: 25% to 400% in 1% increments (total 376 steps)
Fixed preset: Inch system: 25%, 50%, 64%, 78%, 100%, 129%, 200%, 400%
(AB system: 25%, 50%, 70%, 86%, 100%, 141%, 200%, 400%)
Copy ratio
RSPF:
Variable: 50% to 200% in 1% increments (total 151 steps)
Fixed preset: Inch system: 50%, 64%, 78%, 100%, 129%, 200%
(AB system: 50%, 70%, 86%, 100%, 141%, 200%)
Document glass: Moving optical source, slit exposure
(stationary platen) with automatic
Exposure system
exposure function
RSPF: Moving original
One automatic feeding paper tray (250 sheets each) +
Paper feed
bypass tray (50 sheets)
Fusing system Heat rollers
Developer system Magnetic brush development
Light source Tri-color CCD light source (CCD: 3 components; R, G, and B)
Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode)
Resolution
Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode)
Gradation 256 tones (8 bits)
Local voltage ±10% (For this machine's power supply
Power supply requirement, see the name plate located on the back of
the machine.)
Power consumption Max. 1.0 kW
Overall dimensions
31-5/8" (W) x 18-1/8" (D)
(with bypass tray
(802 mm (W) x 460 mm (D))
folded)
4
Weight* Approx. 41.7 lbs (18.9kg)
20-3/8" (W) x 18-1/8" (D) x 14-3/4" (H)
Dimensions
(518 mm (W) x 460mm (D) x 376 mm (H))
Operating Temperature: 50°F to 86°F (10°C to 30°C)
conditions Humidity: 20% to 85%
Sound power level L
wAd
Copying mode: 6.7 B
( )
Standby mode: - *
Sound pressure level L (reference) (Bystander positions)
pAm
Noise level
Copying mode: 51 dB
( )
Standby mode: - *
(*) = Less than background noise
Noise emission measurement in accordance with ISO7779.
*1 When making multiple duplex copies, the copy speed will vary based on
the environment conditions.
*2 First copy time may vary depending on the status of the machine.
*3 The warm-up time may vary depending on the ambient conditions.
*4 Not including toner cartridges.
Printer Function
Print speed* Max. 20 ppm (when printing on A4 size paper)
Resolution 600 dpi
Memory Approx. 30 MB
Emulation SPLC (Sharp Printer Language with Compression)
Interface USB 2.0 (Full-Speed/Hi-Speed compatible interface)
[USB cable]
Interface cables USB cable that supports USB 2.0.
Please purchase a commercially available USB cable.
* When printing same document continuously on A4 plain paper in non-
offset mode, excluding processing time.
Scanner Function
Type Flatbed scanner
Scanning method Document glass/RSPF
Light source Tri-color CCD light source (CCD: 3 components; R, G, and B)
Basic: 600 dpi x 600 dpi
Resolution*
Setting range: 50 dpi - 9600 dpi
Original types Sheet media, books
Effective 8-1/2" (Lengthwise) x 14" (Width)
scanning area (216 mm (Lengthwise) x 356 mm (Width))
Scanning speed 2.88 msec/line
Input Data A/D 16 bit
Output Data R.G.B 1 or 8 bits / pixel
Scanning colors Black and white 2 value, Grayscale, Full color
TWAIN
Protocol WIA (Windows XP/Vista/7 only)
STI
Interface USB 2.0 (Full-Speed/Hi-Speed compatible interface)
Drop out color Yes
Supported
Windows 2000 Professional/XP/Vista/7
operating systems
Void area None
[USB cable]
Interface cables USB cable that supports USB 2.0.
Please purchase a commercially available USB cable.
Scanner utilities Button Manager / Sharpdesk
Network Expansion kit (MX-NB11)
7" (W) x 5-1/2" (D) x 1-5/8" (H)
Dimensions
(177 mm (W) x 140 mm (D) x 40 mm (H))
Weight Approx. 0.44 lbs. (0.2 kg)
Network
expansion kit 128 MB
memory
Emulation PCL6, PS3 (PostScript 3)*
10 BASE-T / 100 BASE-TX Ethernet, USB 2.0 (Full-
Interface
Speed/Hi-Speed compatible interface)
* Available only if the PS3 expansion kit (MX-PK10) is installed.
250-sheet paper feed unit (MX-CS10)
Paper size 5-1/2" x 8-1/2" to 8-1/2" x 14" (A5 to A4)
2 2
Paper weight 15 lbs. to 21 lbs. (56 g/m to 80 g/m )
One paper tray with capacity for 250 sheets of 80 g/m
Paper capacity
bond paper
Weight Approx. 6.6 lbs. (3 kg)
19-5/8" (W) x 17-1/2" (D) x 3-1/2" (H)
Dimensions
(498 mm (W) x 445 mm (D) x 88 mm (H))
Power supply Drawn from the machine
As a part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
Facsimile expansion kit (MX-FX12)
For the specifications of expansion kit MX-FX12, please refer to the MX-
FX12 fax operation manual itself.
CAUTIONS
Each instruction also covers the optional units used with the product.
Caution label on the machine
The label ( ) in the fusing area of the machine indicates the
following:
: Caution, risk of danger
: Caution, hot surface
Cautions on using the machine
Follow the cautions below when using this machine.
Warning:
• The fusing area is hot. Exercise care in this area when removing misfed paper.
• Do not look directly at the light source. Doing so may damage your eyes.
• Machine power must be turned off before installing any supplies.
Caution:
• Place the machine on a firm, level surface.
• Do not install the machine in a humid or dusty location.
• When the machine is not used for a long time, for example for consecutive
holidays, turn the power switch off and remove the power cord from the outlet.
• When moving the machine, be sure to turn the power switch off and
remove the power cord from the outlet.
• Do not switch the machine rapidly on and off. After turning the machine
off, wait 10 to 15 seconds before turning it back on.
• Do not cover the machine with a dust cover, cloth or plastic film while the
power is on. Doing so may prevent heat radiation, damaging the machine.
• Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
• The socket-outlet shall be installed near the machine and shall be easily
accessible.
Important points when selecting an installation site
Do not install your machine in areas that are:
• damp, humid, or very dusty
• exposed to direct sunlight
• poorly ventilated
• subject to extreme temperature or humidity changes, e.g., near an air
conditioner or heater.
Be sure to allow the required space
around the machine for servicing
and proper ventilation.
4"
(10cm)
Cautions on handling the machine
Be careful in handling the machine as follows to maintain the performance of
this machine.
Do not drop the machine, subject it to shock or strike it against any object.
Store spare toner cartridges in a cool dry place without removing from
the package before use.
• If they are exposed to direct sunlight or excessive heat, poor copies may result.
Do not touch the photoconductive drum (green portion).
• Scratches or smudges on the drum will cause dirty copies.
Trademark acknowledgements
® ® ®
• Microsoft , Windows , Windows 2000, Windows
® ®
Windows 7 and Internet Explorer are registered trademarks or
trademarks of Microsoft Corporation in the U.S.A. and other countries.
• Macintosh is a trademark of Apple Inc., registered in the U.S. and other
countries.
• IBM, PC/AT, and PowerPC are trademarks of International Business
Machines Corporation.
2
• Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Reader are
registered trademarks or trademarks of Adobe Systems Incorporated in
the United States and other countries.
• All other trademarks and copyrights are the property of their respective
owners.
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at
least 7 years following the termination of production. Spare parts are
those parts of the apparatus which may break down within the scope of
ordinary use of the product, whereas those parts which normally exceed
the life of the product are not considered spare parts. Consumables also,
are available for 7 years following the termination of production.
SOFTWARE LICENSE
The SOFTWARE LICENSE will appear when you install the software
from the CD-ROM. By using all or any portion of the software on the CD-
ROM or in the machine, you are agreeing to be bound by the terms of
the SOFTWARE LICENSE.
ENVIRONMENTAL INFORMATION
Products that have earned the ENERGY STAR
are designed to protect the environment through
superior energy efficiency.
The products that meet the ENERGY STAR
The products without the logo may not meet the ENERGY STAR
CAUTION:
Do not install the machine in a location with poor air circulation.
A small amount of ozone is created inside the machine during printing. The
amount of ozone created is not sufficient to be harmful; however, an unpleasant
odor may be noticed during large copy runs, and thus the machine should be
installed in a room with a ventilation fan or windows that provide sufficient air
circulation. (The odor may occasionally cause headaches.)
* Install the machine so that people are not directly exposed to exhaust
from the machine. If installed near a window, ensure that the machine is
not exposed to direct sunlight.
In some areas, the "POWER" switch positions are marked "I" and " " on
the copier instead of "ON" and "OFF".
If your copier is so marked, please read "I" for "ON" and " " for "OFF".
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
Shielded interface cables must be used with this equipment to maintain
compliance with EMC regulations.
Laser information
780 nm
Wave length
Pulse times 12.88 µs ±12.88 ns/7 mm
Output power Max 0.2 mW
At the production line, the output power of the scanner unit is adjusted to 0.18 MILLIWATT
PLUS 5% and is maintained constant by the operation of the Automatic Power Control (APC).
Caution
Use of controls or adjustments or performance of procedures other than
8" (20cm)
those specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)
4"
(10cm)
SAFETY PRECAUTIONS
This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and
1040.11 of the CDRH standards. This means that the equipment does not produce
hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The equipment's exterior covers contain several safety interlock
switches. Do not bypass any safety interlock by inserting wedges or
other items into switch slots.
♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
® ®
XP, Windows Vista ,
WARNING:
FCC Regulations state that any unauthorized changes or modifications to
this equipment not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠
Declaration of Conformity
SHARP Digital Multifunctional System, MX-B201D
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party: SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495
TEL: 1-800-BE-SHARP
®
®
guidelines carry the logo shown above.
® guidelines.
+15 nm
-10 nm