Operating The Product; Control Panel; Defrosting - Beko BLSD4V577 Instructions Of Use

Built-in cooler
Table of Contents

Advertisement

5

Operating the product

Control Panel

1. On/Off Indicator
Press the On/Off button for 3 seconds
to turn off or turn on the fridge. When
the fridge is off, the symbol ( ) is lit. All
the other symbols are turned off.
2. Fridge temperature setting button
Press this button ( ) to set the
temperature of the fridge to 8, 7, 6, 5,
4, 3, 2, 8... respectively. Press this
button to set the fridge temperature to
the desired value.
3. Quick fridge function
The button ( ) has two functions. To
activate or deactivate the quick cool
function, press it briefly. Quick Cool
indicator will turn off and the product
return to its normal settings.
Use the quick cooling function when you
want to quickly cool the food placed in the
fridge. If you want to cool large amounts
of fresh food, activate this function before
putting the food into the product.
If you do not cancel it, quick cooling will
cancel itself automatically after 1 hour
at the most or when the fridge reaches
the required temperature.
is not recalled when power restores
after a power failure.
4. Alarm Off
When the fridge door is opened for 1
minute a sound alarm turns on. The
alarm can be turned off by pressing
the "Alarm Off" ( ) button. If you close
the door and then open again "Door
open alarm" will be activated again
after 1 minute later. In the case of
sensor failure, the warning icon will lit
( ). If the button „Alarm off" is
pressed, the warning will be "cleaned".
1
2
5. Vacation Function
In order to activate vacation function, press
this button (
vacation mode indicator (
activated. When the vacation function is
activated, "- -" is displayed on the fridge
temperature indicator and no active cooling
is performed in the fridge. It is not suitable
to keep the food in the fridge in this
function. To cancel this function press
Vacation function button again.

Defrosting

The appliance defrosts automatically.
The defrosting water runs to the drain tube via a
collection container at the back of the appliance
(1) (see diagram). During defrosting water
droplets may form at the back of the fridge where
concealed evaporator is located. Some droplets
may remain on the liner and refreeze when
defrosting is completed. Do not use pointed or
sharp edged objects such as knives, forks to
remove the droplets which have frozen. If at any
time the defrost water does not drain from the
collection channel, check to ensure that no food
particles have blocked the drain tube. The drain
tube can be cleared by pushing the special
plastic plunger provided down the drain tube (2).
This function
Please flush with approximately 100ml of warm
tap water, to ensure that the water drains. If the
blockage is still present, use a suitable
"refrigerator drain cleaning tool", and flush with
approximately 100ml of warm tap water.
NOTE: Do not flush with excessive water, this
will cause the evaporator tray at the back of
the appliance to overflow and cause a leak. If
the problem persists please contact service.
11 | EN
3
4
5
) for 3 seconds, and the
) will be

Advertisement

Table of Contents
loading

Table of Contents