Hardware Hookup - sparkfun ZX Distance and Gesture Sensor Hook-Up Manual

Open
Closed

Hardware Hookup

Add Headers
Solder a row of male headers to the nine headers holes on the board.
To keep the board from tilting while soldering, place the unused break away
headers sideways under the board.
Heads up! Do not solder headers to the row of holes at the top of the
board. Those are for programming the PIC micrcontroller.
Connect the Breakout Board
For the Arduino examples, we will be using I C. Connect the breakout
board to the following RedBoard pins:
0x10
0x11
2
Page 4 of 16