Table of Contents
Advertisement
Caution: Do not touch the flat white cable or the print head rail; otherwise, you may not be able to
print. Do not wipe off the grease on the rail.
6. Moisten a cotton swab with the water and detergent mixture and squeeze out any excess moisture.
Use it to lightly wipe ink off the translucent film.
Caution: Do not press too hard on the film or you may dislocate the anchor springs and damage the
product.
7. Use a new, dry cotton swab to dry the translucent film.
8. Repeat steps 6 and 7 as necessary to clean all ink smears.
Note: Replace the cotton swab, as necessary, to prevent any smears from spreading.
9. When the translucent film is dry and free of any fibers, close the scanner unit.
10. Plug in the power cable and reconnect any interface cables.
Parent topic:
Cleaning and Transporting Your Product
Related tasks
Cleaning the Paper Guide
Cleaning the Paper Rollers
Aligning the Print Head Using the Product Control Panel
282
Advertisement
Table of Contents
