Menu; Menu Tree; Supported File Formats - Samsung HARMAN JBL MP350 Classic Owner's Manual

Menu

To access the setting menu, press the MENU button
To navigate the menu use the navigation buttons on the remote control.

Menu Tree

Output Type
Output Volume
Display
Auto Standby
DAC Filter
System Reset
USB Update
NET Version
Host Version
IP Address
MAC Address
UNIT ID

Supported File Formats

File Type
AAC 16 or 24 bit
AIFF 16 or 24 bit
ALAC 16 or 24 bit
FLAC 16 or 24 bit
MP3 16 bit
OGG 16 bit
WAV 16 or 24 bit
WMA 16 bit
Pg 11 JBL MP350 Classic Owner's Manual EN
Selects which output to use, Analog or Digital with full or partial MQA decoding
(where MQA encoded content is being played). Default is Analog.
Selects whether the audio output volume is fixed or variable. Default is Variable.
Select Display Brightness. Default is Full.
When enabled, the streamer will enter standby after 20 minutes with no user
interaction or playback. Default is On.
Select a digital filter for the analog outputs. Default is Slow.
Press Select/OK to initiate a reset of all settings to default.
Press Select/OK to initiate a software update from a USB stick present in the USB
socket on the rear panel.
Displays the current software version in operation on the NETWORK device.
Displays the current software version in operation on the HOST device.
Displays the current IP address of the MP350 on your network.
Displays the MAC address of the MP350.
Displays the NETWORK ID of the MP350 as identified to other devices on the
network.
Bit Depths
44.1, 48, 88.2 or 96 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1 or 48 kHz
44.1 or 48 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1 or 48 kHz
on the remote control.
Sample Rates