Table of Contents
Advertisement
How to use the remote control to operate the unit
Note:
● This is a general use remote controller, it could be used for the air conditioners with multifunction; For some
function, which the model doesn't have, if press the corresponding button on the remote controller that the unit
will keep the original running status.
1
ON/OFF :
Press this button to turn on the unit .Press this button again to turn off the unit.
2
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases
set temperature. In AUTO mode, set temperature is not adjustable.
+
:
3
Press this button to increase set temperature.Holding it down above 2 seconds rapidly increases set
temperature. In AUTO mode, set temperature is not adjustable.
4
MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY,
FAN,and HEAT
COOL
AUTO
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed
on the LED of the indoor, and the unit will automatically select the suitable operation mode in
accordance with the room temperature to make indoor room comfortable.
5
FAN
:
This button is used for setting Fan Speed in the sequence that goes from AUTO,
to
Low speed
●
X-FAN function：Hold fan speed button for 2s in COOL or DRY mode, the icon "
and the indoor fan will continue operation for a few minutes in order to dry the indoor unit even
though you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not
available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is
stopped to avoid mould.
●
Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will
continue running for a few minutes. at low speed. In this period, Hold fan speed button for 2s to
stop indoor fan directly.
●
Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete
unit will be off directly.
Remote Controller Description
*
, as the following:
*
FAN
HEAT
DRY
,
then back to Auto.
Auto
Low-Medium speed
Medium-High speed
*Note:Only for models with heating function.
9
OPERATION INSTRUCTIONS
,
Medium speed
High speed
" is displayed
,
,
Advertisement
Table of Contents
