Optional Accessories - Sharp R2130 Cooking Manual

U N P A C K I N G A N D I N S T A L L A T I O N I N S T R U C T I O N S
MOUNTING OVEN TO THE WALL
Two people are recommended to attach the Microwave Oven/Hood to the Mounting Plate.
1. Thread the Power Supply Cord through the hole made in the bottom of the top cabinet. Install the oven by snapping
it onto the Mounting Plate. See Figure 23.
2. Use two Tapping Screws 5 to secure the levers that are on the bottom of the oven. See Figure 24.
3. Use two Top Cabinet Screws 3 and two Flat Washers 6, supplied in the INSTALLATION HARDWARE, to
attach the unit to the top cabinet. See Figure 25.
4. Make a bundle of the Power Supply Cord and attach it to the inside of the cabinet using the Power Cord Hanger
4. See Figure 25.
5. Attach the bottom sash # to the oven by sliding the two tabs into the rectangular openings located on the bottom
front of the oven. See figure 26 (A).
6. Use 5 Tapping Screws 4 x 12mm 5 from the INSTALLATION HARDWARE and tighten into place. See Figure
26 (B).
Figure 23
CHECKLIST FOR INSTALLATION
1. Make sure the unit has been installed according to
all of the Installation Instructions and the Wall and
Top Cabinet Templates.
2. Plug in the power cord.
3. Keep the Operation Manual.
O P T I O N A L A C C E S S O R I E S
Two optional accessories are available for this oven.
1. Charcoal Filter (RK-260). This is required when hood exhaust is recirculated. See Charcoal Filter on page 34.
If dealer does not stock this item, it can be ordered by calling 1-800-642-2122.
2. Filler Panel Kit. For use when the oven is installed in a 36-inch or 42-inch wide opening. The metal filler panels
come in 3-inch wide pairs. One set is needed for a 36-inch opening and 2 sets for a 42-inch opening. White,
black, stainless and bisque are available.
To purchase contact:
Figure 24
5
Imperial Cal Products, Inc.
1141 S. Acacia Ave.
Fullerton, CA 92831
Phone: (714) 446-7440
Figure 25
5
Figure 26
(B)
Fax: (714) 446-7444
14
3
4
6
(A)
(A)
(B)
(B)
(B)
(B)