ABB cFMus TZIDC-200 Manual page 24

24 TZIDC-200 DIGITAL POSITIONER | CI/TZIDC-200/C-FM-US-EN REV. B
... 5 Installation
... Mechanical mounting
1 Attachment bracket
Figure 15: Screwing the mounting bracket onto the positioner
Figure 16: Screwing positioner onto actuator
Note
After mounting, check whether the operating range of the
actuator matches the measurement range of the positioner,
refer to Measurement and operating range to HW-Rev.: 5.0 on
page 17or Measurement and operating range from HW-Rev.:
5.01 with optional contactless position feedback on page 19.