Table of Contents
Advertisement
Remote Control Operation
Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan
speed, and air direction.
English
14
Selecting an operation mode
To change the current mode between Auto, Cool, Dry, Fan, and Heat,
press the
(Mode) button.
NOTE
You can use the Cool, Dry, and Heat modes in the following operation range.
Mode
Cool
Indoor
16 °C to 32 °C
temperature
16 °C to 46 °C
(AR**TY*****)
Outdoor
temperature
-10 °C to 46 °C
(AR**TX*****)
Relative
Indoor
humidity of
humidity
80 % or less ²⁾
¹⁾ If the outdoor temperature drops to −15 ℃, the heating capacity may
decrease by as much as 60-70 %.
²⁾ If the air conditioner operates in Cool mode in a high-humidity
environment for an extended period of time, condensation may occur.
You can switch between Celsius and Fahrenheit indications on the
remote control.
▶ Press and hold for 3 or more seconds.
NOTE
• The temperature indications on the indoor unit are not switched.
• This function is canceled when the remote control batteries are
replaced. In this case, run this function again.
Dry
Heat
18 °C to 32 °C
27 °C or less
16 °C to 46 °C
(AR**TY*****)
−15 ℃ to 24 ℃¹⁾
(AR**TX*****)
-10 °C to 46 °C
(AR**TX*****)
_
_
Advertisement
Table of Contents
