Fisher & Paykel CDV2-304HL N User Manual page 18

Replacing the burner parts
IMPORTANT!
When replacing the burners, make sure that the two locating pins on the bottom of
the brass flame spreader are properly aligned with the locating pin holes on the top
of the simmer ring. Incorrect alignment will produce a potentially dangerous flame
and poor burner performance.
Locating Notch
Igniter
Locating Pin
Hole Inside
16
CARE AND CLEANING
Burner cap
Main Burner Port
Ring
Locating Pin
Hex Nut
Simmer Ring
Locating Pin
Burner Base
Venturi