Displays; Drawer Lock Key - Sharp XE-A402 Instruction Manual

5

Displays

Operator display
Receipt OFF indicator
Repeat / Sentinel mark / Power save mark
• Clerk code or Mode name
The mode you are in is displayed. When a clerk is assigned, the clerk code is displayed in the REG or
OP X/Z mode. For example, "?01?" is displayed when clerk 01 is assigned.
• Repeat
The number of repeats is displayed, starting at "2" and incremental with each repeat. When you have
registered ten times, the display will show "0". (2 ➞ 3 ......9 ➞ 0 ➞ 1 ➞ 2...)
• Sentinel mark
When amount in the drawer reaches the amount you preprogrammed, the sentinel mark "X" is displayed
to advise you to remove the money to a safe place.
• Power save mark
When the cash register goes into the power save mode, the power save mark (decimal point) lights up.
• Function message display area
Item labels of departments and PLU/UPCs and function texts you use, such as %1, (-) and CASH are
displayed. For the details of function texts, please refer to pages
When an amount is to be entered, ------ is displayed at the numeric entry area with a guidance message
"ENTER PRICE".
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
Date and time appear on the display in the OP X/Z, REG, or MGR mode. In the REG or MGR mode, press
s
the key to display the date and time.
Error message
When an error occurs, the corresponding error message is displayed in the function message display area.
For details of error messages, please refer "Error message table" on page 75.
Customer display
(Pop-up type)
6

Drawer Lock Key

This key locks and unlocks the drawer. To lock it, turn 90
degrees counterclockwise. To unlock it, turn 90 degrees
clockwise.
Power save mark (Lighting the mark only under the power save mode)
Clerk code or mode name
Function message display area
Numeric entry display area
48 and 49.
7