Commission Rate Programming; Miscellaneous Key Programming - Sharp XE-A40S Instruction Manual

*: Item:
A Commission group number
B PLU/subdepartment selection
Key operation example
When you program the last PLU code, the programming sequence will be complete with a press of
the

Commission Rate Programming

3
Based on each clerk's sales total of each commission group and the corresponding commission rate, the
commission amounts are calculated, which is printed on clerk reports.
Commission rate
Key operation example
You must use a decimal point when setting a fractional rate.

Miscellaneous Key Programming

4
The cash register provides miscellaneous keys such as
. While the cash register is pre-programmed so you can use these keys, you must set a currency
conversion rate to use
data below for programming these keys. Factory setting is indicated with parentheses.
,
,
1
10
key.
Commission
number (1 or 2)
28
1
15
key. You can also program these keys for more convenient use. Please refer to the
Percent rate (0.00%), tax status (non-taxable), sign (minus), item % and subtotal %
entry* (both are allowed), percent rate limitation (100%)
Amount (0.00), tax status (non-taxable), sign (minus), item
(both are allowed), entry digit limit (7 digits)
Not necessary to program
Entry digit limit (9 digits)
Currency conversion rate (0.0000), currency conversion rate entry method - open or
preset (both are enabled)
Selection:
Subdepartment
PLU
Commission rate
(0.00 - 999.99)
, , ,
Entry:
0-2 (0: Non commission)
0
1
Print
Commission group
PLU/subdept.
Print
, , , , ,
and subtotal
, , and
entry*
35