Sharp VN-EZ1U Operation Manual page 33

Importing Images into a Computer
Using a Floppy Disk Adapter
Some computers require a commercially available floppy
disk adapter to read a SmartMedia card contents.
Precaution:
• Also see the instructions that come with the floppy disk
adapter and the documentation attached to your computer for
the operations.
1
Remove the SmartMedia card from the Digital
Recorder (see page 17). Install the supplied driver
software for the floppy disk adapter on your
computer.
2
Insert the SmartMedia card into a floppy disk adapter
as shown below. Make sure to insert the correct end
of the card into the slot.
67
3
Insert a commercially available floppy disk adapter
into your computer's 3.5˝ floppy disk drive slot.
Notes:
• Note that you can write and delete images on the SmartMedia
card through a floppy disk adapter even if the write-protect
seal is attached on the card.
• Note that some of commercially available floppy disk adapters
are not compatible with a SmartMedia card of 16 MB or more.