On-Screen Error Messages - Sharp BD-AMS20U Operation Manual

On-screen Error Messages

The following messages appear on the TV screen in case of an error during operation.
Error message
Cannot play.
Incompatible disc.
Cannot operate.
This USB memory is not formatted properly. Please format
the memory in USB memory management.
The Connected USB Memory cannot be used. It should be
compliant with USB 2.0
NOTE
Cinavia Notice
• This product uses Cinavia technology to limit the use of unauthorized copies of some
commercially-produced film and videos and their soundtracks. When a prohibited use
of an unauthorized copy is detected, a message will be displayed and playback or
copying will be interrupted.
• More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.
68
Possible Error
• The disc cannot be played back with this Player.
• If you load a disc which cannot be played with this
Player (i.e. a scratched disc), or if you load a disc upside
down, this message will appear, and the disc tray will
automatically pop out.
• Occurs if the loaded disc cannot be played because it is
a non-standard disc or scratched, etc.
• Occurs if an operation is incorrect.
• Occurs if there is a formatting error.
• Occurs if the USB memory is not formatted with FAT
32/16.
• Occurs if USB memory not compliant with USB 2.0 High
Speed (480 Mbps) is used (i.e. USB 1.0/USB 1.1).
Suggested Solution
• Check the disc, and load it correctly.
• Remove the disc.
—
• Format the USB memory again.
• Format the USB memory with your PC.
• Connect USB 2.0 High Speed (480 Mbps) compliant
USB memory.