Table of Contents
Advertisement
SETTINGS
• If the USB memory device is not properly installed
or the correct update file cannot be found on
the USB memory device, an error message is
displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
OK
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
OK
About Output of Audio Formats
Audio format
Dolby TrueHD
Dolby Digital Plus
DTS-HD Master Audio
DTS-HD High Resolution Audio
LPCM
Core only
I
Down mixed
J
When "Secondary Audio" is set to "On", the audio is output as 48kHz.
K
When "Secondary Audio" is set to "On", the audio is output as PCM.
L
When 5.1ch (192kHz), the audio output is downsampled to 96kHz.
M
When 2ch, the audio is output as 192kHz.
M
PCM outputs as 2ch during playback of video on demand content (page 59).
N
58
10
Press ENTER to start updating.
• The screen becomes dark for a while until the
update screen can be displayed. Please wait for
the update screen to appear. Do not unplug the AC
cord.
The picture will temporarily go dark until
the software update display appears.
Wait several minutes and do not unplug the AC cord.
Now updating
Do not unplug AC cord.
*
Update Version
Maximum number of
channels
7.1ch (48kHz/96kHz)
5.1ch (192kHz)
7.1ch (48kHz)
7.1ch (48kHz/96kHz)
5.1ch (192kHz)
7.1ch (48kHz/96kHz)
7.1ch (48kHz/96kHz)
5.1ch (192kHz)
OK
yyyyyyyyyy
30%
HDMI
PCM
Bitstream
7.1ch *
3
7.1ch *
4
5.1ch *
5.1ch *
3
4
7.1ch
7.1ch *
4
7.1ch *
3
7.1ch *
4
5.1ch *
*
5.1ch *
3/
5
4
7.1ch *
7.1ch *
3
4
7.1ch *
3
—
5.1ch *
—
3
11
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, check the file in the USB
device and try Software Update again.
12
Press POWER to turn off the player.
• Delete unneeded software update data using a PC
after the software update process is completed.
13
Remove the USB memory device.
DIGITAL OUT
PCM
2ch *
2
2ch *
2
2ch *
2
2ch *
2
2ch *
2
2ch *
2
2ch *
2
2ch *
2
Bitstream
5.1ch *
1/
*
3
5.1ch *
*
1/
3
5.1ch *
*
*
1/
3/
6
5.1ch *
1/
*
3
5.1ch *
*
1/
3
5.1ch *
*
1/
3
—
—
Hide quick links:
Advertisement
Table of Contents
