Download Print this page

Kohler Mariposa K-1239-GLW Manual page 2

Advertisement

Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Blower, Heated
120 V, 15 A
Surface:
Technical Information
All product dimensions are nominal.
Installation:
Three-wall alcove
Drain location:
Left
Basin area, bottom:
46" x 24" (1168 mm x 610 mm)
Basin area, top:
54" x 27" (1372 mm x 686 mm)
Weight:
106 lbs (48.1 kg)
Minimum floor load:
44 lbs/ft² (214.8 kg/m²)
Water depth:
14" (356 mm)
Water capacity:
63 gal (238.5 L)
Electrical component
Blower: 120 V, 10 A, 60 Hz
rating:
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
W
Minimum flat for door:
2" (50 mm)
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-25-2019 05:39 - US/CA
5' BubbleMassage
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
Mariposa
Bath
K-1239-GLW
1/2" (13 mm) R.

Advertisement

loading