Page 1
IMPORTANT: READ CAREFULLY BEFORE BEGINNING 1. Do not tighten bolts until fully assembled. FOLDING ADIRONDACK CHAIR ITEM # TX 36600 & TX 39010 PARTS AND HARDWARE LIST SEAT PANEL BACK PANEL FRONT LEGS X 1pc X 1pc LEFT ARM BRACE...
Page 2
STEP 1 Attach Seat Panel (2) to the Front Legs (1) with Bolt (A), Nut (B) and Washer (C) for the right side and Bolt (A), Nut (B) and Locking Pin (D) on the left side.
Page 3
STEP 2 Attach Back Panel (3) to the Braces (4) with 2 Bolts (A). STEP 3 Attach Braces (4) to the Seat Panel (2) with 2 Bolts (A), Nuts (B) and Washers (C). STEP 4 Attach the Right Arm (6) and the Left Arm (5) to the Front Legs (1) with 2 Bolts (A), Washers (B) and Nuts (C).
Page 4
Limited Warranty and Care Instructions LIMITED ONE YEAR WARRANTY (NON-TRANSFERABLE) This product is covered under United General Supply’s (UGS) one (1) year limited warranty. To the original purchaser of this piece of furniture, cooler or accessory; UGS warrants that it will be free from defects in material and workmanship for up to one year from the date of purchase under normal use and proper care.
Need help?
Do you have a question about the TX 36600 and is the answer not in the manual?
Questions and answers