Gigabyte G293-Z20-AAP1 User Manual page 34

For Slot3/Slot4/Slot5/Slot6
Follow these instructions to install the GPU card:
1. [For Slot5/Slot6] Loosen and remove the two screws securing the PCI cage at the top of the
system.
[For Slot3/Slot4] Loosen and remove the single screw at the top of the system and the two screws
at the rear of the system securing the PCI cage.
Pull the two plastic handles to lift up the PCI cage from the system.
2. Insert the card into the selected slot. Make sure that the card is properly seated.
3. Secure the GPU cards in place with two screws.
Slot9 (GENZ_1)
REAR
Slot10 (GENZ_2)
Top:
Bo�om: Slot4 (PCIE_2_PCIE_1)
(For Slot5/Slot6)
Slot3 (PCIE_2_PCIE_2)
1
2
System Hardware Installation
Top: Slot5 (PCIE_3_PCIE_2)
Bo�om: Slot6 (PCIE_3_PCIE_1)
1
2
- 34 -
FRONT