Gigabyte G293-Z20-AAP1 User Manual page 113

Parameter
ECC Configuration
(Note) This item available when DRAM UECC Retry is set to Enabled.
Description
Press [Enter] to configure advanced items.
DRAM ECC Symbol Size
Š
– Configures the DRAM ECC Symbol Size.
– Options available: Auto, x4, x8, x16. Default setting is Auto.
DRAM ECC Enable
Š
– Enable/Disable DRAM ECC. When set to Auto, it will set ECC
to enable.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.
DRAM UECC Retry
Š
– Enable/Disable DRAM UECC Retry.
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled.
Max DRAM UECC Error Replay
Š
– Default setting is 8.
Memory Clear
Š
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.
Address XDR after ECC
Š
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled.
BIOS Setup
- 112 -
(Note)